what is up everybody golden Holden here with gold plating services and today we are going to
be unboxing a jewel master so this is going to be a bigger box I'm going to open it up
in this box we're going to have our solutions and depending on what option you get you're
gonna have either TriVal or a surface activator or something along those lines
and then we have our rinse beakers and the beakers to hold our solutions in
all right so right here I have some sample pieces
and there is eight in a little baggie and these are just to make sure that your gold is working so
you can play onto these first before you play onto your item to see if your solutions are working
now we have this box in here it's already opened we'll have a ring rack as well as our power source
our safety equipment our bus bars a common lead
and the anodes for whatever solution you're going to be using
and then we have our machine itself let me take this out
there we go we'll open this up
and in here we have a thermometer
and then the jewel master itself
so right here we have the jewel master and then we have our power supply and our thermometer and
then our beakers with the rinse speakers our ring rack our anodes and then we have a plating sample
for you and then our chemicals before we get started we're going to actually look at just this
caution label and it says that if you have a 220 volt power supply then it will instantly destroy
your heaters in this machine and it has to have
a converter to convert it to 120 volts and the power should be around 50 to 60 hertz
now that we've taken our caution label off our heater
our heater controller we're going to plug this into our outlet
next we are going to plug in our ac power supply so we'll just open up these
and this is going to be plugged in into this outlet right here and make sure it's plugged
in all the way and there's nothing showing now we're going to get our other end and plug it in
and we'll plug this into the wall
now that we've got our machines plugged in to turn it on we're going to go to this switch over here
and flip it on this red led should turn on and our meter should turn on it's going to look like it's
flashing but that's just because it has a refresh rate that is not being captured onto our film
and to turn it up this is our knob to turn up our voltage it shows it right there going up
to turn on our heaters they're actually separated so this is our heater controller
and we'll turn it on and it has a low and a high so we're going to turn it on and that turns on
this heater to turn on this heater we're going to flip this switch and now it is controlled by this
controller and you can turn it on and off if you'd like just like that and this one will stay on if
you keep it on so just make sure to turn that off to start setting up we're going to get our
beakers and they should have the lid with the same color dots on the lid and the beaker so we're
going to just set these into our beaker slots and now we're going to get our anodes and we're going
to plug the red into the red port the green into the green port and to the blue port
we also have this thermometer and this will go into our gold solution beaker
and just clip in just like that and then we have these bus bars
these help with hanging your part with the ring rack
now we have our common lead and we'll put that right in there
and we have our ring rack which when you put something on this
you will just hang it onto your beaker and begin your plating
all right so here's an example of all the pieces on a ring rack and we'll just put it in
our solution like that and that will is what it's going to look like when you're plating your items
all right this has been unboxing the jewel master and remember before handling any solutions
remember to wear your safety equipment that is provided in the kit and happy plating