unboxing and setting up the hp envy
inspire 7200 7200e 7900 7900e all-in-one
printer series
open the box and remove the power cord
ink cartridges setup guide
and cardboard insert
remove the printer from the box
remove the protective end caps and
plastic bag
remove all tape from the outside
surfaces of the printer
open the main paper input tray and
remove all tape from the paper tray
then close the paper tray
lift the scanner lid and remove the
protective foam sheet
close the scanner lid
lift the tape that secures the front
door
open the front door and lift the
cartridge access door
remove the cardboard from the print area
then lower the cartridge access door and
close the front door
the getting started card has the qr code
for downloading hp smart to your mobile
device and hp support information
connect the power cord to the rear of
the printer and then plug the other end
of the power cord into a wall outlet
the printer will turn on automatically
if the printer doesn't turn on
automatically press the power button
on the printer control panel touch your
preferred language and then touch
confirm
touch your country or region
on your computer or mobile device visit
123.hp.com
to download hp smart software or for
windows 7 and 8 users the hp easy start
software hp smart is required to print
with your printer
open the software and follow the
step-by-step instructions to connect the
printer to a wireless network
create an hp account and complete your
optional hp plus registration depending
on your printer model
finally follow the guided animation to
complete printer setup
to install ink cartridges open the front
door then lift the cartridge access door
and wait until the carriage is idle and
silent before you continue
remove the new cartridge from its
packaging and then remove the plastic
tape using the pull
tab caution do not touch the copper
colored contacts or the ink nozzles
handling these parts can result in clogs
ink failure and bad electrical
connections
slide the ink cartridges into their
corresponding slots until they snap into
place
when you are done loading the cartridges
lower the cartridge access door and
close the front door
to load paper into the printer open the
paper input tray then push the photo
tray back into the printer
slide the paper width guides to the
edges of the paper tray
load a stack of plain white paper with
the print side facing down into the
paper tray
make sure the stack of paper is aligned
with the appropriate paper size lines
and does not exceed the stack height
marking in the tray
adjust the paper width guides until they
touch the edges of the stack of paper
close the paper tray
pull out the output tray and then raise
the tray extension
on the control panel select continue to
align the printheads
the printer aligns the printheads and
prints an alignment page
an alignment successful message displays
on the control panel select ok
you are now ready to print
click the playlists tab in youtube to
find hp videos in other languages
and search our channel to find official
hp support videos
you