So like here in the smaller detailed areas, we are going to slowly work the Red Rocket
into the surface to reveal a---
So if you guys want to check out these products, head
over to our website ChemicalGuys.com cause you know you want---
What's up guys, welcome back to the Chemical Guys Detail Garage.
It's kind of gloomy out today, so we decided to take advantage of this cooler weather and detail
this white Nissan 370Z.
Now, before we start any detail, we are going to move onto the dirtiest area, which is always
the wheels.
Now, as you can see, this car had tons of brake dust and road grime.
That's because the owner likes to track this car and that attracts a lot of brake dust.
Heavy braking tends to burn off a lot of the brake material and it's collected all over the wheel.
So, we are going to start by rinsing it down and this is going to
help 1. Loosen up the heavier brake dust and it's also going to help lubricate the surface
so we're not scratching it as we're detailing.
We're also going to be introducing two of our new brushes: Our Red Rocket Brushes.
Now, these are a nice soft nylon bristle brush that are going to help 1.
Take care of any of that brake dust is that is hard to reach in the back of the barrel
and also in the small spokes and it's also going to give your wheel a professional look.
So, let's get started without further ado by rinsing down the wheel.
We'll work our way from top to bottom using our Diablo Wheel Gel as an assistant to add lubrication
and also to add some cleaning power.
So, as you can see, water alone is not enough to remove the brake dust on the surface, so
that's why we have our brushes here and some Diablo Wheel Gel to get these rims looking
their best.
So, what we'll do is take the Diablo and add about an once or two into our wash bucket,
which I've already added a dirt trap to.
This is to reduce our chances of any of the abrasive particles of the brake dust, road
grime, returning to the surface and also scratching.
Now, we'll use our hose to activate the suds.
And these suds act as lubrication that add shine and more importantly, this is going
to reduce that chance of those abrasive particles scratching the surface.
To begin, we'll get our big Red Rocket Brush and attract some of that foam onto the surface
and then working at the highest point, we'll go around the rim, knocking down the embedded
particles of brake dust so that
they 1. Don't start pitting and also they don't ruin the finish.
We'll gently start scrubbing back and forth and the long design of the brush goes all
the way to the back of the barrel between the rotor and the wheel.
This way, when you look through the rim, you're going to see a perfectly clean and detailed finish.
So, as you can see, the long design of the Red Rocket easily and effortlessly goes between
the caliber and the wheel, this way we are not leaving a dirt or road grime behind and
we'll give it that factory finish and also restore some of that shine.
Again, more importantly, while we're detailing the wheel, this is removing the abrasive and
corrosive particles of brake material.This way again, they won't pit the surface and
they also aren't going to deteriorate the finish of any clear coat or any painted surfaces.
So, now this rim is starting to look really good.
This brush has done a tremendous job of taking care of the loose and also the large areas,
but there are still intricate areas in the smaller spokes that we want to tend to.
So, we've also got our smaller Red Rocket.
This is the Little Red Rocket, which is great for small areas like the spokes here, and
also the corners and crevices to reveal a fresh shine and get as much of that debris
off so we have a perfectly clean wheel. And now you can also use this brush to get behind
the spokes, this way you have a clean wheel not only from the face, but also from the back.
Works nicely to get the intricate areas around the caliper, especially if you've got painted calipers
or aftermarket calipers to give it the best overall finish.
And there you have it guys.
Just by using two brushes, this rim looks factory fresh and we can still do the wheel
and tire obviously to make this car look its best, but today, we are going to just focus
on the rims.
You can see that the Red Rocket has done a tremendous job at removing the abrasive particles
of brake dust.
We're going to rinse it down and in the mean time, you guys can head over to our website
and get these brushes for yourselves cause you know you want your wheels to look their best.
Also, don't forget to like and subscribe to this video and we will see you next time right
here the Detail Garage.