For humans, food and drink are more than just a necessity for survival.
They’re a huge part of our culture and our history, shaping our lives on a daily basis.
And alcohol has had perhaps the strongest, uh, influence on us.
Pun intended.
From soft alcohols like beers and wines to hard liquors like whiskey and vodka, booze
comes in many shapes and styles, and can be found all over the world.
But how did humans discover alcohol, and how is it made?
Thanks to some microscopic organisms, some time, and some crafty chemistry, we’ve gotten
pretty good at our creating our own hooch!
The alcohol we’re describing today is ethanol, which is actually just one type of alcohol.
But it’s the only one that’s safe to drink in large quantities, because we’ve developed
the ability to metabolize, or break down and eliminate its toxic components.
Ethanol occurs in nature thanks to fermentation -- the process of breaking sugars down into
ethanol and carbon dioxide.
And humans -- and our non-human ancestors -- have been able to metabolize that ethanol
for a really long time.
From examining our DNA, some scientists estimate that our ancestors developed the ability to
metabolize ethanol around 10 million years ago -- way before we were mixing our own cocktails.
Back then, we hadn’t even split off from the ancestors of chimpanzees.
But that adaptation could have been helpful for our early primate ancestors by allowing
them to eat fermented fruit without getting sick.
Evolving humans must have enjoyed what they felt when they ate fermented fruits, because
figuring out how to create our own fermented beverages quickly became a centerpiece of
human culture.
In fact, there are some researchers who believe that our desire for alcohol is what drove
us to develop agriculture, which would have given us constant access to the grains and
starches needed to produce our own booze.
The earliest known evidence of the deliberate creation of an alcoholic beverage is 9,000
years old, discovered in some pottery in the Yellow River Valley in China.
This drink was some sort of wine, and contained rice, honey, and grapes.
In 2005, researchers actually recreated the drink based on a chemical analysis, and apparently
it tasted, quote, “very intriguing.”
Archaeologists think that around the same time people were originally making this stuff,
barley beers and grape wines were being produced in the Middle East.
People probably made those early drinks by leaving fruits and grains in covered containers
for long periods of time.
Eventually, they’d open the containers, and the liquid inside would be alcoholic -- but
for thousands of years, no one knew exactly why this was happening.
Thanks to modern science, we’ve got it pretty much figured out.
Beers are produced by fermentation, which comes from the Latin fervere, meaning “to boil.”
Which makes sense, because the mixture of grains and water does bubble during the process.
And a beer really only needs four basic components: grain, water, yeast, and hops.
Different varieties of these components mixed in different ratios can give each beer a distinct flavor.
There are also different ways to do the beer-brewing itself.
But here’s how the process generally works:
The first step in making beer involves cooking grains in water, which produces a mix called
the mash.
The heat activates enzymes within the grains and begins to break the starches down into
simple sugars.
Different grains are used for different kinds of beer; dark roasted grains are used for
darker, heavier beers like stouts while light grains are used for light beers, like wits
and pilsners.
Once they’ve all been cooked down, the grains are removed from the pot and the remaining
liquid is boiled.
At this point, the liquid is called the wort, and it’s during this step that the primary
flavoring element of the beer is added -- hops.
Hops are actually flowers, harvested from a climbing vine called Humulus lupulus.
Beers have always been flavored with herbal mixtures, and we’re not sure when or why
hops became the herb of choice -- but it was first noted as being part of brewing sometime
in the ninth century CE.
Adding hops to beer helped balance the sweet flavors from the grains with an acidic kick,
but more importantly, the hops kept it from spoiling, so the beer lasted longer.
We now know that hops produce antibacterial compounds called alpha and beta acids, which
help keep the beer free of bacteria and support the growth and survival of the yeast.
These acids mainly give the beer its distinctive bitterness, but different varieties of hops
can also give beers citrusy, floral, and even piney notes.
After the boil, the liquid is rapidly cooled to prevent bacterial contamination and oxidation,
which can change the taste of the beer.
Once the wort is cooled, the yeast is added to begin the fermentation process.
Yeast -- in this case, a particular variety called Saccharomyces cerevisiae -- is a microscopic,
single-celled fungus.
Yeast rely on sugars for energy, so they eat up the sugars in the wort and spit out carbon
dioxide and ethanol as waste products.
The carbon dioxide is why the liquid bubbles, and the ethanol is why there’s alcohol in beer.
During the first phase -- the primary fermentation -- there’s a lot of yeast hard at work.
All that waste carbon dioxide is allowed to escape the container, while the ethanol is
left behind.
After a while -- usually a minimum of two weeks -- most of the sugar has been consumed
and most of the yeast is dead.
In some cases, the beer is transferred to bottles with a small amount of sugar, to help
fuel the remaining yeast through the last step: secondary fermentation.
The beer is then tightly capped, and the carbon dioxide and ethanol produced within the container
are preserved, finally turning the liquid inside into the fizzy, intoxicating beverage
so many of us love.
Wine production is similar to beer-making in a lot of ways.
It’s just that, instead of grains, wines use fruit to produce alcohol.
And as you probably know if you’ve ever tasted a $3 bottle of wine, different varieties
of grapes, and how they’re prepared, can dramatically affect the flavor of the wine.
First, the grapes are crushed. Back in the day, people used to stomp on the grapes in
big tubs, but now it’s generally done with specialized mechanical crushers.
The resulting mixture of skins, pulp, and juices is called the must.
Whether the wine is a red or a white usually depends on this step.
White wines are often made from green grapes, and red wines are generally made from purple
grapes -- but the color of the grape doesn’t automatically determine what type of wine
it will be.
In fact, purple grapes can be used to produce both kinds of wine.
Leaving the dark grape skins sitting in the must will lead to a red wine, while separating
the juices from the skins and pulp quickly will lead to a white wine.
Those dark grape skins also contain tannins -- compounds that a chemist would call polyphenols.
They’re made of lots of connected rings of carbons attached to an oxygen and a hydrogen.
These compounds give red wine its characteristic dryness, and help red wines age well, smoothing
and mellowing the flavor over time.
As with beer, the key component in turning the grapes into wine is the presence of yeast.
In the old days, naturally-occurring wild yeast on the grapes, mashed into the must
by winemakers’ feet, would kickstart the process.
These days, winemakers sterilize the must and add their own specially-selected yeast
for better control over the wine’s flavor.
Just like with beer, the yeast converts the grape’s sugars into ethanol and carbon dioxide.
After fermentation, the yeast is killed off or filtered out and the liquid is clarified
to remove particles that might affect the taste or appearance of the wine.
The wine may then be aged in wooden barrels for a few months to a few years, which gives
the drink more flavors.
Finally, it’s bottled and shipped off for consumption, ready to be sipped by vinophiles everywhere.
So those soft alcohols, as it turns out, are pretty easy to make by mistake - but what
if you want throw a really crazy party?
How do we make hard liquor?
High-alcohol-content beverages like vodka and whiskey require an additional step: distillation.
Distillation is a process of deliberate evaporation, cooling, and condensation that produces purified liquids.
Creating hard liquors this way takes advantage of the fact that ethanol has a lower boiling
point than water, so i t turns into a gas at a lower temperature than water does.
Just like with beer and wine, hard liquors begin with a fermentation step.
Different fruits, grains, and starches can be used to create this initial brew, depending
on the liquor.
For example, potatoes are generally used for vodka, while bourbon is made from corn, rum
comes from sugar cane, and tequila is made from agave.
The yeast gobbles up all of those sugars and produces ethanol and carbon dioxide, but the
liquid has a relatively low alcohol content -- around 10-15%.
So, to make the liquor truly hard, we have to purify some of that liquid to give it a
higher alcohol content.
The liquid is transferred to the still, where it’s heated inside the pot until the components
with lower boiling points begin to boil off.
As the solution vaporizes, the temperature is increased very slowly, pushing other compounds
to boil at the appropriate temperatures.
The boiled--off vapor rises to the top of the pot and passes into the distillation column,
where specialized plates cool the vapor and cause it to condense and drop back into the pot.
This gives distillers precise control over the spirits as they pass up through the column,
allowing them to make adjustments to the contents and flavor of the drink.
The compounds with the lowest boiling point are able reach the top of the column and pass
into the lyne arm, a horizontal pipe that condenses the vapor back into liquid so it
can be collected.
This distillate is collected in stages, with each stage kept separated by its boiling points.
The first portion of the distillate, called the heads, contains the most volatile compounds
- the liquids with the lowest boiling point.
These include acetone and esters, and small amounts of these compounds are saved to add
flavor to the final product.
The second portion of the distillate is called the heart, and it’s the most important part,
because it contains all of that intoxicating ethanol.
The heart is collected, mixed with some of the heads, and usually further modified until
it reaches the desired flavor profile.
Which … sounds really strange out of context.
Some of these modifications involve flavoring the liquid directly, like by adding juniper
berries to gin.
They can also involve redistillation -- passing the distillate through the process all over again.
And of course, hard liquors can be modified through aging.
Like wine, the type of container a spirit is aged in can have a significant effect on
its behavior.
Bourbon is aged in newly cut and freshly-charred oak barrels, imparting a rich, smoky flavor
to the drink.
Scotch, on the other hand, is aged in used barrels -- usually in barrels that have been
previously used for aging bourbon or sherry.
Different varieties of the same kind of spirit can age for different amounts of time, too
- like how white, or blanco tequila isn’t aged, but reposado, or rested tequilas have
been aged in oak for at least two months.
So there are a lot of ways to turn that distilled ethanol into the many different kinds of liquors
available around the world.
Scientists are working in breweries and distilleries every day to combine these scientific techniques
in new and interesting ways, creating super-bitter beers and unusual kinds of liquors.
And all of these beverages are a part our culture and our history, from the earliest
beers to the latest development in distillation technology.
Thanks for watching this episode of SciShow, which was brought to you by our patrons on
Patreon. If you want to help support this show, just go to patreon.com/scishow. And
don’t forget to go to youtube.com/scishow and subscribe!