hey y'all i'm jimmy with find us camping today you found us hooking up water to
this great big Keyston Fuzion let's get
started
even if you're a newbie rver or a novice rver there is a couple things you're
going to need to get started out there the first time
you go out these are just some of the things that
we use and we're going to go over a couple of them right now
so the first thing you're going to want to have is a pressure regulator
some of these campgrounds have a lot of water pressure some of them don't have
that much water pressure so if you don't have this hooked up it can
blow the pipes inside there they're not built like a house and they
don't they don't handle the pressure that a normal house will so we bought
one of these we keep it between 20 and 30 pounds
to keep it from blowing the pipes the next thing you want to have is
a water filter some of these parks have well water some of them have city water
you don't know what you're going to get out there so it's always better to have
a filter to try to keep some of the sediment and
some of the trash out of the out of your inside of your camper so always have
yourself a water filter but it's not necessary to have a stand
you can put this a lot of people just set it up or hold it up or put it inside
their camper it does have four holes on top of it so
you can mount it we like to have the stand that way all we do is
set it inside there and it's done the next thing you're going to want is to
use a zero g hose it doesn't kink it rolls up real
easy and as you can see we can roll it right up inside here real
quick easy and it doesn't take up a lot of space
the last thing you're going to want is you're going to want a 90. this comes
off the side of the camper into your hose and it makes it so the
hose doesn't kink if you hose kinks you have no water so
this helps you get in here so now we're going to show you how to
hook it all up all right the first thing we like to do is put our pressure
regulator up here you definitely want to make sure the rubber seal is in here if
not you will get sprayed with water so we just put it on here screw it on
hand tight
it's on now we're going to take our our short hose that goes to our filter
make sure again the rubber gasket's in there if not like
i said you will get soaking wet and then we'll take the end of that put
it on our filter screw it in nice and tight
so now we're going to install my 90 on here as we walk up here to the camper
itself
now it's on
send it on up hook it up to the city water
and that is it now before you go and turn your water on
you want to make sure everything is off inside we've seen a lot of people
leave their faucets on inside they turn the water on out here set everything up
everything up inside and they start seeing a flood underneath so
we already know everything is off inside but now it's time to turn the water on
and hope nothing leaks and here it goes hey while we're on the
road we always get all kind of people ask us how do we do
this how do we do that how do we set the water up how do we set the sewer up
how do we set this big thing up so what we're going to do right now is we're
going to try to build a little bit of a series to show a lot of the newbies
how we do what we do on the road so all those products you just saw
we do have an amazon store we have a link below we put everything together
for you so it's easy to find you don't have to go searching for it
these are products that we recommend these are actually the products that we
use as you can see we do make a very small commission off
of that so if you wouldn't mind go down there click click the link below
check it out tell us what you think don't forget to stick around we will be
doing more of these these videos for you to
teach you what we've learned on the road so don't forget to hit that subscribe
button ring the bell and until the next time
you find us camping safe travels y'all
you