Inflate your balloon with about five or six inches
of uninflated end. We're going to do something different with the nose.
What we're going to need is an extra long nozzle. This is how you get it.
I like to hold with my right the nozzle. Now what I do is squeeze my left hand here and then
release with my right and I try to squeeze so no air can get out with my left hand.
One more time.
You can see the extra long nozzle. Now I can tie it off.
That gives me my extra long nozzle.
Now we're going to make a small basic twist about two inches.
One more to match.
You have two basic twists here. Now what you're going to do is twist this into the nozzle here.
Something that helps so it doesn't come undone is to feed the nozzle between the two basic twists.
You
have something that looks like this. Now we'ere going to make the ears. So we're going to make
some long bunny ears. Pretty much however you want. I'm going to do about three to four inches.
Make another ear to match here.
And twist these together in a lock twist.
You have something that looks like this. Now in order to straighten the head on
the body that we'll be forming here, we need a uninflated section of the balloon. Amnd we do
pretty much the same thing we did with the nozzle earlier. You squeeze and push the air this way.
And you can see the uninflated section of the balloon. I'm holding it here. I twisted it.
Now we're going to secure the ears to the other side
of the head and then use this extra long nozzle to secure everything.
Now i'm holding the nozzle and I'm going to wrap it around
and tuck the excess nozzle into the bunny set.
And you can see the bunny's head here. Now for the body we're going to make
four small basic twists for the legs.
Four basic twists. Twist this into here.
You have something that looks like this. Now we're going to make the body
and then make a tail and cut off the rest.
Small body.
Twist this into here. You have something that looks like this.
We need to make a pinch twist here. We'll tear off or cut off the rest. So let's do that.
Get a bunny tail. Now if you want more security you can feed the pinch twist
between the arms and legs.
Now let me show you how to trim the rest of the balloon.
Get your scissors. Now we're going to trim the rest of the balloon here. Now if you
inflate it a little less than I did, you would have some uninflated end here and that makes
it easy. All you have to do is pinch off the uninflated end. Just ake your scissors, cut
and then let it deflate and then cut off the excess. And we'll actually first wrap it around
the pinch twist and then cut off the excess. In the scenario that I have here it's fully inflated
and that's actually the worst scenario. But it's good that I have it so i can show you how to get
out of it and cut the rest of the end off. So what you do is you take the end, you squeeze and you
create a little slack at the end here like this. Now you can trim and deflate the balloon.
Just like that. Now take your uninflated end and wrap it around the tail and
there's your ultra cute bunny balloon.