I want our Soyuz guys something first let's do
this first they'll get right back to you check this out
okay so what did you think well I'll tell you what I've used all kinds of different
cutting oils over the years and sometimes you just have to have a cutting oil and you have
to have a good cutting oil here's that block right there and you can see you know I drove
into this stainless steel and it won't go any further than that but if I use the cutting oil
yeah she'll go right straight through it smokes and it does its job and it takes a little bit
of time this is not just mild steel this is stainless steel and that's the problem that
I found and a lot of times with some cutting oils is some are better than others some you
will pay a fortune for for some cutting oils and I'm going to show you what the cutting oil that
I use it's cheap it's available everywhere just go to your regular big-box store you go to the
plumbing aisle and so far I've only seen it sold in two brands this one here and another one called
oak leaf and this is it here and I'll tell you what I paid less than ten dollars for this junk
I got a small little oil can and I've been using this for years and guess what it does a terrific
job it's not going to cost you a fortune and I use it for all my topping of my threaded holes
as well and dies and I really can't find a reason why to go and spend four times as much for other
cutting oils which I have in the past and guess what they didn't do any better than what you're
doing right here and this cutting oil from your regular big-box store I think is the
deal use guys let me know in the comments what kind of cutting oil you use and whether you've
had any better success because many times when you're cutting a piece of you're cutting threads
or if you're drilling into some hardened steel or stainless steel you're gonna wear your bits
out before you actually drill a hole or you need some cutting oil so this is what I use and that's
the bid for the day so they joined me here today if you've never seen this channel before you're
welcome to subscribe and yous guys are gonna save a fortune by buying that cutting oil at
your regular big-box store rather than spending I've seen them for $30 for a half a liter Cheers
you