[music]
Hello, this is Brian Messick
with Messick's farm equipment,
we are now going to go over
the operation of the New Holland Work-master 70 tractor.
When entering on onto the tractor
you want to make sure you grab onto the hand rail
and the steering wheel
and enter up onto the tractor.
We're now going to drive the tractor,
we're now going to go over
proper starting procedures of the tractor,
when sitting on the tractor
you want to make sure the shuttle's in neutral,
your range lever’s in neutral down here
and your gear shift on the side is in neutral,
you will depress the clutch,
then you will turn the key.
Once the tractor's started
you can take your foot off the clutch pedal
as long as the tractor is in neutral
will not go anywhere.
Then place the tractor in gear,
your range lever on this side over here,
forward being low,
back being high,
we put the tractor in low gear.
We come over on this side of the tractor
then we put the tractor in the first gear,
we reach down
down here on the side,
we turn our parking brake lever
off and we step on the parking brake lever,
the tractor is now free to move.
We take our shuttle lever,
we put it in the forward position,
and as we let off the clutch
the tractor will start to drive.
Okay, with the tractor in gear
and in the forward position
as we let out the clutch
we start to go,
we can increase our speed with
our hand throttle
or our foot throttle
and as we go we're going to depress
the clutch and shift the second gear,
third gear,
and then fourth gear.
From here we can shuttle to reverse
by simply depressing the clutch,
pulling the lever back,
letting out the clutch
and now we go in reverse.
To go forward, depress the clutch
shuttle forward
now we could go forward and you can repeat this
back and forth
just by depressing the clutch.
When getting ready to exit off the tractor,
we want to make sure we put our
shutter lever back in neutral,
our range lever back in neutral
and our gear lever back in neutral.
You will then
pull up on the park brake,
turn and depress the brake pedal,
an indicator light on the dash will light up
to let you know that the park bake is engaged,
you may now take your foot off the clutch pedal,
turn the key off
and the tractor will disengage.
When exciting off the tractor,
you want to make sure you exit off backwards,
stepping on the step pedal
and getting off the tractor.
That is the proper safe way
to enter and exit a tractor.
An option for these tractors
is a front end loader
as you can see on this tractor here,
with this loader comes this
quick attached front couple here,
to lock in your implement
you just simply push down on the handles
like so,
would lock in your bucket, your set of forks,
pull up on either handle
from both handles and that disconnects your bucket.
As we start the tractor
and make sure everything's in neutral,
and we start the tractor.
As I move the joystick back,
you will see the front end loader raises.
As I move the joystick forward,
you will see it’ll lower.
As I move the joystick towards me,
the bucket cylinders retract.
As I move it away from me
the bucket cylinders extend
to dump the load.
There is a safety lock out on this loader
this little button right here,
push that in
and you cannot move the joystick of the loader,
locks the joystick fast.
Thank you for watching this video,
my name is Brian Messick
with Messick's farm equipment,
if there's anything we can do for you
part service or sales
please look us up on the web
at www.messicks.com
or call us at 1-800-222-33-73,
thank you.
[music]