- What's up, guys?
Welcome back to "Detail Garage."
I'm Hector.
So we still got the ZL1 here
and then before it went away,
we wanted to make sure we took care of these pipes.
So what we're gonna use today is a couple tools.
We got our Workhorse Black Microfiber Towel,
our Ball Buster, and then our Light Metal Polish.
I did a little test spot to see how bad they were.
And they're pretty bad.
A towel by itself will get 'em cleaner.
It just won't get it completely clean.
So what we're gonna do is
we're gonna apply to our Ball Buster,
get it in the pipes and get a nice finish,
nice chrome look again, get it back.
You can see that one side is getting
a lot more exhaust than the other.
So it just throws it off a little bit.
The car looks great after the HydroCharge,
so we wanna make sure the pipes look good as well.
So what I'm gonna do is
I'm gonna start with this one over here first,
so we can see a difference of
what it should look like versus
what it looks like right now, all right?
So we're gonna use, like I said,
our Light Metal Polish.
This is great for copper, aluminum,
stainless steel, most metals.
And I love it for exhaust pipes like this.
It not only cleans it and gives you a nice shine.
It also leaves a nice little layer
of protection behind, so it doesn't stick.
The exhaust doesn't stick,
and build up like it does now.
So, protect, and shine.
You can't really beat that, right?
So here we go.
So we're gonna add to our Ball Buster.
Now, not much is needed.
We're only doin' a couple lines down the top here.
All right, and what we'll do
is we'll just, gonna put it on there, work it in.
What you don't want is to have it pulled out,
and then you hit the trigger,
you're gonna splatter all over everywhere.
So you wanna make sure you get it
spread onto the exhaust,
and when you're in the exhaust you're able to
spin it while it's in there,
'cause then you'll make a mess.
All right, now that we're done,
we're gonna grab our Workhorse Black Microfiber Towel
and buff off any excess,
and also buff off to a nice shine.
And there you have it, folks.
Nice and clean, and it's also protected.
So, you can also use the Ball Buster
for the outside, but because this is so enclosed
you can also use our Light Metal Polish
on just the towel.
That's what I'll do now,
just to get some of the edges outside
and make sure it's fully clean
and completely lookin' good.
And then we buff off any excess.
Boom.
All right, guys, so there you have it.
All nice and cleaned up and shined up.
So, again, what's great about this Light Metal Polish
is that it cleans and it protects.
It leaves a little layer of protection behind,
so this exhaust and whatever you're using it on,
there's no buildup and no corrosion.
It's doesn't lead to anything embedding
to the actual metals.
So, I'm gonna get to finishing everything up here
on the rest of the ZL1.
If you guys enjoyed this video,
make sure you like, you subscribe
and share with your friends.
But anyways, we'll see you guys here next time
in the "Detail Garage."