Welcome to Sage Audio. Today we’re doing a Vocal Masterclass.
To get the most from your music, consider watching the entirety of each chapter
because each chapter builds from the previous to create a complete understanding of the topic.
If you have a mix that you need mastered, consider sending it
to us to receive a free mastered sample of it with the link in the description.
The Frequencies of a Vocal
A voice resides between 100Hz all the way up to 18kHz - it’s an incredibly complex instrument but
let’s break down its frequencies. Between 100 to 300Hz will be the vocal’s fundamental - 500Hz will
be where the pronunciation of vowels occurs, and 700 to 1kHz is where you get nasally resonances.
With this in mind, I’m going to use a high pass up to 100Hz,
with a small boost on the key’s fundamental.
I’ll gently boost 500Hz to make the vocal more intelligible,
but I can also cut it some to make the vocal sit further back in a mix.
If the vocal sounds nasally, I’ll find where this is happening between 700Hz
to 1kHz and dip that until I no longer hear unwanted nasal tones.
Let’s listen to these changes.
The Frequencies of a Vocal Pt.2
Next let’s talk about vocal clarity, sibilance, and air - perceived clarity
resides between 1kHz and 4kHz. What you boost will depend on the vocal
and the mix, but I usually find 2kHz to be a good starting point to boost,
and then I’ll move the band around until I find the exact section I want to boost.
A 1-octave bandwidth works well here. For sibilance, which is between 4kHz and 11kHz
we have a couple of options. We can use an EQ to dip it,
a dynamic EQ to dip it, or a de-esser which is basically a high-frequency compressor.
I like to use dynamic EQ mixed with de-essing to tame sibilance here. Last up
I’m going to use a shelf to boost the air of the vocal - this adds somewhat to clarity,
but mainly gives the vocal a delicate, sometimes ethereal feel.
Describing the purpose of an airband is a little difficult - it’s one of
those things you understand when you hear it.
If you’re enjoying the video, consider hitting the like button;
it really helps us bring more videos to you
Dynamic Range of a Vocal Compressing a vocal is
difficult - it needs to be controlled; but since the voice is so familiar to us,
we can easily hear when it sounds compressed. To remedy this I like to use 3 compressors,
each with different purposes; peak down, RMS down, and upward in that order.
Peak down compression works by attenuating from the vocal’s peaks down. RMS measures the loudness
of the vocal and compresses from the loudest points down. Upward compression measures the
signal from the noise floor up, and compresses and amplifies it, which adds a lot of detail.
I get a few dB of attenuation the 2 downward compressors but use more aggressive
low-level compression since it’s less noticeable. Let's use quick attacks for
the downward compressors and a release of 50ms to retain detail without distortion.
Why Saturation is so Important
Saturation gently compresses, but more importantly, it forms harmonics which
alter a vocal’s timbre, frequency, perceived loudness and cause a psychoacoustic effect
in which the fundamental is generated in the mind of the listener.
With an EQ we could boost the fundamentals and harmonics, but these frequencies change.
Whenever a new note is sung, the fundamental changes - since saturation works
with this fundamental, it’ll follow it whenever it changes.
Use multiple saturation types and maybe an exciter
to create a complex array of these harmonics for your vocal.
Resonant Frequencies and Soothe 2
Because vocal notes are changing, so too are the resonant frequencies - with that in mind,
attenuating them is challenging, but soothe2 lets you do this dynamically. Know that you don’t need
to use this plugin - but it does help with some subtle issues that arise when working with vocals.
I’ll use the soft option, with a low depth, and higher rendering and
oversampling options to make it as accurate as possible and to avoid phase issues.
Only a small percentage of people that watch our videos are subscribed, so if
you’re enjoying the video, consider subscribing, it’s free, and you can always change your mind
Separate Your Breathes and Sibilance
To better control difficult parts of the vocal, let’s find the breathes and sibilance in the
actual track, isolate them and then add them to a new track. We’ll lower the level of this
track and add whatever processors we need, such as compressors, equalizers, and so on.
For a cool effect, we can add some reverb and compensate for its
changes to the gain to soften the sibilance.
3 Types of Vocal Reverb
I’m going to use 3 different types of reverb on my vocal - the first,
a super short room or ambient reverb to thicken the vocal. The second will be a medium-length
reverb with dense reflections and an emphasis on the mid range - this way the vocal blend in.
Last up I’ll use a long, stylistic reverb to give the vocal character
and an identity separate from the surrounding instrumentation.
If you're enjoying the channel, consider supporting us by joining
with the link in the description to help us bring you more videos and content.
Doubling and Modulation
When trying to make your vocal sound thick you can use a doubling plugin, a thick delay, modulation
like a chorus effect, or a combination of these effects. Doubling is going to introduce a very
quick delay to create 2 distinct voices that are still perceived as coming from the same source.
Modulation will shift one of those voices, typically with a modulating
frequency or timing, to add more variation to the doubled signal.
Re-amping
or Impulse Response
Re-amping your vocal is a great way to change the signal’s timbre and create a more complex
response. You can re-amp your vocal using physical components like a speaker and then
record that speaker, or you can use a plugin that uses impulse responses to recreate the effect.
I’ll use a plugin for this and place it at the beginning of my chain
to affect all of the processing that comes after.
If you have a mix that you need mastered, consider sending it to us to receive a
free mastered sample of it with the link in the description. Thank you so much for watching.