Hello everyone, welcome back to PJ Chen Design. Halloween season is coming so
let's take a look on how to make this pumpkin shape. Are you ready, Let's get started!
We are going to start making some bumps, of course you can kind of do
what every bump that you like which it's not symmetrical. The way I will do is
I will use these stars and snapping into the zero, making the corner of a start
number for 10, and you can do any size that you want, and have them to come back.
Once we have that, we need to have the corner to be rounded. Let's use the
fillet corners, and we can fillet this one. Let's set it up for radius for 2
and see how we like it. At this point, you can kind of make it
not as symmetrical, because it's organic shape, and you can have one speaker or
smaller or whatever that you like to change. After that, we are going to make a
copy by 3D scale with Gumball, and then we wanted to make a copy by clicking ALT key.
So the things that we have is we have the big one is right in the
middle, and depends on how tall your pumpkin is going to be. I draw the other
one over there, so the pumpkin is coming outline like this bumpy. In fact, when
it come into the center we want it to be nice and smooth. so right here, I'm going
to draw a circle and bring the circle in a little bit. What I mean a little bit is
this shape is coming over here, and kind of cave in to make it symmetrical. I'm
going to have this one mirror to the other side, so we're going to use the
command called loft. We're gonna pick in the order, go to one,
two, three, four and five. Go to the top view, and double make sure everybody is
aligned. So we want to make sure that everybody is snapping into the quadrant,
otherwise, pumpkin surface will be twisted. Let's take a look on this
one. If everything should look nice to you, you can just click OK.
then we already have this shape here you can simply just use the "cap" to cap the
opening. So it will be closed over there. okay so I'm going to lock this one, and
just using this curve. For this curve, I'm gonna scale it down a little bit, and
making a copy. Make sure it's still snapping into the center, so let's using
aligned tool, and snapping into the centers. So this is where the bottom is
going to be, and once this is coming out, I will like it come back to the circle.
So on the top, it's going to be a circle. so you're going to see something like
this. Have this moving to the top. If we look at the curve right here. This
curve that we have. If we want to rebuild, we need to make sure it's degrees 3.
We're gonna make it into 24, and let's click OK. Make sure the top one is
a degree 3 too. Then we have the same point to curve over there. Let's
using the commands called loft, and we're gonna loft again from here to here, and
make sure they are aligned to the quadrant, or somewhere close to the quadrant.
This is the surface that we get, and it's a single surface that means we can
turn on a control point. so in order to have more control points, I want to insert
somewhere on the bottom over here. somewhere on the bottom over here, and
somewhere at the neck over here, and then let's take a look what we can do. At the
front view, we're going to turn on the control point, and I want this one to be
scale it down a lot, so we can get that beautiful neck over there. and maybe
we're gonna lower down this one, and make them a little bit bigger, so we can kind
of a getting the shape like this right over here. We might also want to get it
smaller and smaller.
so you're kind of getting this like neck looking shape, and you can do
whatever change that fitting into your design. We can also turn them in the
angle so we might want to kind of turn them like this, and this seems sitting a
little bit too lower so let's bring it up a little bit, and once you like it you
can go ahead and cap it. Let's go ahead to take a look on the render view.
So give a very nice bumpy shape over there, and once you assign the material
and that will be what it looks on the rendering. I would like to give it a
special thanks to Karl Brophy, thank you for your generous donation to my channel.
that will help me to improve the channel content and helping more people. I'm so
excited because this is my first donation that I received from the
channel, so thank you, and thank you for everybody for your watching please like
and comment and share my videos, so I can reach more people who want to learn
Rhino. Thank you and I'll see you next!