Hello guys.
Welcome to Tenorshare channel.
If you purchase an used iPhone online or get it from a friend.
And see the activation lock when setting it up.
The reason for this might be that the previous owner has enabled find my iPhone.
If the previous owner forgets the Apple ID and password.
Is it still possible to unlock it without the credentials?
Fortunately, the answer is yes.
In today’s tutorial I will show you how to make it.
Let’s get started.
The tool we are using is 4MeKey.
I will leave the download link in the description below in case you want to download.
Once launch 4MeKey.
Plug your iPhone into the computer.
Then click on start.
4Mekey will download the jailbreak tool first.
Now insert an empty USB thumb drive into the computer.
Once detected, hit start to create the jailbreak drive.
After that, you will see a guide showing you step by step on how to complete the jailbreak
on Windows.
We follow the guide to restart the computer.
When it boots up, press F12 to enter the boot option.
Then boot your computer from the UEFI hard drive, Next we will see the checkrein jailbreak
wizard.
Make sure your phone is still connected at this point.
The device information will be shown on the computer screen.
It says iPhone X is not supported at this point.
No worries, we should head to the option first.
Check off allow untested iOS and skip A1 BPR.
Then go ahead and quit back.
Now it says iPhone X is partially supported.
That’s fine.
Let’s proceed.
The device will be put into recovery mode first, press next to confirm.
Once in, you need to put the phone into DFU mode manually.
Just follow the instructions before the countdown is over.
For iPhone X, press and hold the side and volume down button for 4 seconds.
Then release the side button but continue holding the volume down button for another
10 seconds.
Once in DFU mode, you will see the jailbreak code running on your device.
After that, let’s reboot the computer.
And open 4MeKey to start over.
This time you will get straight to the device information screen.
Go ahead and click on start remove.
4MeKey will do the removal for you in a minute.
Well done.
Now we just need to set the phone up and then you can get access to it.
When we see the data and privacy option.
It means the find my iPhone service has been removed.
Let’s move on.
Please be noticed that not to create passcode, Touch ID and Face ID here.
And skip signing in your own Apple ID when you got here.
Then you can proceed to the Home Screen.
Now you can notice that the Apple account has been signed out, which means the activation
lock has been removed.
That’s it.
For more tutorials, you can subscribe and give us a big thumbs up.
Thanks for watching.
See you in the next video.