We will start by cutting the felt. The felt will be used as a backing
for your feather. It hold’s the feather’s shape when you hang it on the wall. Cut
your felt to your desired size. If you are interested in creating several feathers I
would recommend cutting yourself a template that can be used to measure out your felt.
My template is 13 inches (33 cm) long and 7 1/4 inches (19 cm) wide at its widest point.
This creates a finished feather that is 15 inches (38 cm) long and 8 inches (21 cm) wide.
During this video I will speed up a few sections such as when I cut the felt and
brush out the string . If you would like to view these sections in real time please
click the settings option at the bottom right of the screen, click speed and click 0.25.
Next we will cut the twisted string to create the feather. Cut a piece
of string that is 36 inches (92 cm) long. This piece of rope will run
along the centre of your feather. Fold it in half and tie a double knot at the top.
Cut 32 pieces of rope - each piece is 17 inches (43 cm) long. Attach these
pieces of rope to your centre piece using Cow Hitch knots. A Cow Hitch
knot is the reverse of the Lark’s Head Knot. If you were to create a Lark’s
Head knot and then flip your work over you would see a Cow Hitch knot.
Attach one piece on the left, one piece on the right,
and so on. Repeat this process until you attached all 32 pieces of rope.
Here is what it will look like overtop of the felt. I like to leave an inch or
so of string on each side so that you cannot see the felt from the front.
With the two middle strands tie a double knot at the bottom of your work.
Remove the felt from the back and brush out your string. I am going to change to another
board behind my work so that I don’t scratch up this board when I brush out my string.
Using your pet brush, brush out your string.
I like to go back over the string with a fine comb afterwards to make
sure the string is completely brushed out and does not curl.
You might find some extra cotton on your brush - that is normal
just get rid of it before you start brushing again.
Flip your work around and brush out the other side.
Decide which side of the feather you want to be the front of your work. We will add felt
to the other side of your work. I will use this side as the front of my work.
Grab your glue and add glue to the centre piece of your feather.
Add glue to your felt as well.
Flip your work over and add a little extra glue to the top.
Flip your work back over and cut along the sides of your work. Follow your felt template.
My regular scissors are a bit dull so I used my sewing scissors. I would recommend
a sharp pair of regular scissors but sewing scissors will work as well.
Cut the other side and then flip over for final trimmings.
Comb the front strands to make sure it is all straight and then cut where necessary.
I like to fluff my feather up a little bit to give it a little more depth.
Thanks so much for watching! If you like this video please
hit the thumbs up below and if you have any feedback please feel free
to leave a comment. Don't forget to subscribe for more video tutorials!