Hi Guys!
I'm Lily, and thanks for watching us.
If you didn't know, back in 1996,
the first robot vacuum cleaner came out,
and it was officially mass-produced to the market in 2001.
Now it's 2022 right,
after more than 20 years we know that smart home appliances producers
try their best to keep up with customers' needs.
Today we will show you the new Redkey R2 model
that deserves your attention. Let’s see what is in the box!
Okay
So as we can see
there is a Robot itself
and Charging dock
Power adapter
2 Side brushes
Duster bracket (with duster)
Dust brush
Remote control
Quick guide and the Manual
You can find two buttons on the surface.
There are Recharge and Power Buttons.
By short pressing the Recharge button,
you will let the robot go to recharge itself
or pause and if you press it longer,
then it will turn on into fixed point cleaning.
Ok, let me tell you once again:
Recharge button
Short press: recharging/pause
Long press: Fixed point cleaning
What about Power Button?
Is there any tricky thing with that?
I'm telling you,
there is, actually yes, there is
By short pressing the Power button,
it will pause or continue cleaning,
and by long-pressing,
you will turn it off or on.
So, let me tell you once again:
Power Button
Short press: cleaning/pause
Long press: power on/off
oh yeah there is one more thing
if you press two buttons simultaneously,
then you will get access to Network Configuration.
Basically when you have any probs with your internet
and to reconnect Redkey to your network
all you have to do is to press the
Recharge button + Power Button at the same time.
I think it's very convenient!
By the way,
there is another quick into about Light State.
Light State is a language that you can communicate with the Redkey.
Now it's time to show Quick Redkey R2 Anatomy!
Let's start from the side face.
There are one Infrared receiving sensor and two Collision Sensors,
and it is covered with a nice bumper that prevents any furniture damage.
If you ask me what is infrared sensor what is collusion sensor
An infrared sensor is an electronic instrument that is
used to sense certain characteristics of its surroundings.
A collision sensor is a piece of electronic safety equipment
that detects an impact through vibrations
After opening
we can see there is a Removable 2in1 water tank,
this one
2in1 water tank/dust box with a HEPA filter.
Which is great, that it saves lots of space.
I think like in 2021-2022 water and dust tank is getting viral.
what about on the bottom there are lots of things we can share:
Universal wheel right here
Two charging electrodes
2600mAh battery
Two side brushes
4 Boundary sensors
Cover for middle motor
Rolling brush
And two buffer driving wheels
Yeah, that's all
Now let's take a look at the Charging Dock.
where is that, it's right here
On the top, there is a charging indicator.
The Signal transmitting is located in the middle of the charging base.
Charging electrodes are right here to get connected to the charging electrodes.
And the last Cable slot is on the left side.
We recommend to users charge their robot first, to do that:
Place charging home base against the wall, plug-in adapter,
and the signal light on the charging home base will flash.
Don't forget to remove obstacles about
1-meter distance at two sides and 2 meters ahead.
You can either place the robot to the charging dock manually
or press the HOME button
on the remote controller to direct the robot to charge the home base for charging.
While your robot is in charge how about
if I will show you an APP connection tutorial?
To do that all you have to do is find Redkey in your smartphone
application store,
like Apple Store or Android Store;
or you can scan the QR Code as below & download APP,
Register And Login.
Set up the network configuration by pressing the following two buttons below.
Enter the WiFi password.
And make sure that your WiFi is 2.4 GHz.
If you are an iOS user,
then you should go to Settings WLAN,
choose Redkey_R2_XXXXXX network connection,
when it’s successfully connected, re-open the App.
And for Android users,
you just need to follow what the APP indicates,
select and connect the network.
The last but not the least part is to check up
is your APP in network connection status or not,
and wait for the network configuration to finish.
So finally,
you are successfully connected to your app.
A robot control dashboard will appear when the connection is finished.
Then you have to just enjoy the happiness
from smart wet & dry robot vacuum cleaner
The first time the robot is operated,
it will map and memorize the whole house by means of
the laser before the cleaning cycle.
Redkey's new robot vacuum comes
with three cleaning modes: Eco, Medium and Turbo.
Eco-mode is the lowest setting
and is designed to clean with the lowest noise level.
It’s also the mode that helps conserve the battery.
The Medium mode comes with increased suction power to
clean dirt and debris on the floor.
And Turbo Mode is the highest suction power
and the setting you choose
if you want to deep clean dirt
and debris you can't see in your carpet.
To operate using the remote control, this one
point the remote control to the robot
and select your desired command down below.
You can also select your command through the robot onboard control menu.
And yeah, before using your remote for the first time,
install 2 AA batteries which are included. There are these following options.
So there are Schedule 3 type Power levels * and there are Back home * Time
Manual control On/Pause * Edge mode *
So let me tell you one by one
On/Pause *
To start cleaning just press the Power button on the remote control.
The robot will plan the cleaning route automatically.
3 type Power levels *
Press the Power Levels button which looks like 3 strokes,
it will allow you to select the desired power levels like Eco Medium and Turbo.
The suction power is 2500 Pa.
Edge mode *
I like the Edge mode, as you can see it's right here,
Under edge cleaning mode, the robot will do cleaning
along with corners, walls, around furniture,
and edges with its side brushes
What about Back home *
Press the HOME button,
the robot will direct itself automatically to the charging station.
By the way,
don't forget to remove the water tank before charging it.
So what about Schedule
The robot is provided with a schedule function in order
to provide a maximum-efficiency cleaning.
You can schedule the robot cleaning time as you want.
When a certain time is scheduled,
the robot will leave the charging home base
and start working at the scheduled time.
Redkey provides 2in1 water and a dustbin tank.
The water tank part is 220ml, and the dustbin size is 250 ml.
Open the dust rubber,
fill it up with water.
Install the two-in-one water tank into the robot.
There should be a click sound.
Attach the wet cloth to the duster bracket.
Install the duster bracket to the bottom of the robot.
As you can see Redkey performs really well
picking up all of these debris on the floor and the carpet
While it was like making a map around the room,
it cleaned all of these dirt under bed and table.
And it was really fun to use it.
Of course we found out that when it comes to the carpet
it's just automatically increased its power
and turn on the medium and turbo mode.
It could pick up all of the hair and the debris on the high carpet.
And you know like cleaning high pile carpets
it's really hard even for handhold vacuum cleaners.
We also turn on the edge mode,
according to the edge mode it cleans all of the corners
it showed super great results,
because it picked up all of these debris on the corner,
and you know it's really hard for this kind of vacuum cleaners,
I mean robot vacuum cleaners.
We tried also the mopping system.
The mopping system actually not bad,
I mean it's good.
But how to say,
if you set really high requirements Cleaning dark sports,
pale or anything else it will clean but not clean that much enough,
you have manually clean the the sports
You would like make wet cleaning once in 2 or 3 days,
it would be just perfect That's my personally review
about this Redkey R2.
The price for this item is only 189.99 euro,
and it's only 215 bucks.
I believe that just for this price
the vacuum clean which has application
and remote controlling system,
it has also 2 in 1 water and dust tank,
and also the one 1 charge lasts for almost 2 hours performance
I think it's just perfect for those who
would like to give a try to buy a vacuum cleaner
I believe that's all.
Thank you guys for watching out video.
Hope your guys enjoyed it.
If you have any concerns advises please write down in comment section below.
and don’t forget to subscribe to muchen world.
I’d be really appreciated.
Bye.