Good morning guys Kirk here Kirk Giordano plastering, today what we're gonna do is
we've got a patch here that was done several years ago and it wasn't done very well obviously
it's a smooth patch and here we have a skip child finish now this patch here is it's it's heavier
and lighter in some areas you put a trial you can see it kind of balance so the fella asked me gee
well should we remove it the problem is if you remove this patch you'll have to repaper it and
rewire because you'll compromise the membrane easier method would be just to apply another
color finish over it welcome corner to corner and here I can take it a little higher this
wall if I hit with water you can see it darkens this patch also darken which means I don't need
a bonding agent to do what I'm going to do the color coat will adhere by suction so I'm gonna
do is I'm gonna take a water hose because it's not ninety degrees already the sun's coming
this is gonna this the walls are hot it's gonna draw the water moisture right out of this color
coat so first thing I'm gonna do it I'm gonna saturate this wall it doesn't matter if I get
this window wet exactly we have a curb in here it's a deck so it doesn't matter I'm not gonna
cover this window and if I drop any on the track I'm just gonna hold it in the idea is saturate
this so when I do my coat right now it will in here there we go so I'm gonna take some mud out
of here and rather than rather than just go four inches off to take us to this natural wall here
as I'm going to the wall here won't give me a good place to stop and plus it'll hide this gap
right here I just try to protect you right over the gap it's not gonna come out too well then
I'm gonna come above here I'm only doing about six inches above and a couple scoops, please
won't job won't show you a hole ready five more minutes let's read the whole thing out on this
corner here I'm gonna go straight to the wall I think give me another five and I'll have this all
done detection okay guys we went ahead and spread that out now I'm gonna take I dropped a little bit
on them just wipe it right off because we have a track under here now what I'll do is since
I spread this out I want to take my float and go over my joint make that right there and the
top piece here let's gather this it a little bit better that way when I do my texture it'll blend
in a lot better to know how to do this now take that top up a little bit otherwise it will blend
in now over here against this wall that doesn't matter because we have a wall right here and now
what I do next is I look at their texture okay looking at their texture and I see is we've got
one up and went out most folks do do that way all right so I'm gonna now match their texture
this is a twenty thirty bug right here so I'm looking at they went straight up so that's what
I'm gonna do let's start it right here straight up depending on what I knock this down that means
when I travel I'll have that texture when I get to this corner over here full of a different way
so you can actually see me so I'll be taking it this way just like you take it down to the lot of
that deck level and then this is painted you're not gonna see this right here this particular
finish he's called the skip shop what's the beauty of a skip shop it's very forgiving this
was um sweet finish didn't do this it was a flood flash couldn't good just very forgiving okay well
happy here know what I can see is we're in a hot neighborhood I'm gonna let that set a little bit
a little bit longer because it's in the shade right here I'm looking at their pattern their
pattern was knocked down before it got completely dry so here that's what we have this I gotta let
set about five minutes over here this is ready to knock this down and then this guy's yeah it
has to be painted but you will not see where the patchwork was done I'm going to painted you're not
gonna see that point no set myself up a ladder and just pull it up a little bit in about five
minutes anyhow I'm gonna finish doing this but you guys get the idea a lot of people call me they say
manager I need to break out these caps because it's bad you don't need to break it out every
single time sometimes maybe but on this you don't we're gonna clean up the frame and and there's a
couple final touches but just wanted to show you what you can and what you can't do my name is
Kirk I'm we've hooked it on the plastic lens use your books we'll see you guys on the next one.