Hello.
In the past video I made a device for a drill with a cutting disc.
Now I will make a second device, called grindstone.
How it will be arranged is understandable from the video, but the trouble is there are
too big gaps between the washers and the bolt and between the washers and the abrasive wheel.
Nothing, I have a technology, how to eliminate such defects is a sticky tape.
So I reel the necessary amount of tape on the bolt and then wrap the tape on a pile
of washers.
In this way all defects will be eliminated.
== When I wrapped the tape, I cut off the excess
tape so that it does not interfere with the ideal centering of this product.
== Well, everything is ready.
It remains for me to tighten the nut and the device is ready.
Now you need to check the emery in the work.
Now I need to install the emery on the drill and try something sharp.
== I'll try to sharpen
the knife.
== Superb, it all works fine.
So, let's sum up: I have four nozzles for a drill, two I made myself, and I bought two
in the store, it is a felt polishing wheel and a steel wire brush.
These tools allow me to get four machines from one drill at a time.
This emery, polishing machine, machine for cleaning metal objects and cutting machine.
But this is in the next video.
In the meantime, good-bye.