man I am going big time I got a tripod and everything look no shakes okay this
is the beginning of the rocket stove project let's begin that pipe is the
center pipe it's where the fire is going to burn and
right now I'm working on cutting a 45 with my sawzall I'm gonna finish it up
right now
all right I'm gonna weld that yeah I know it's galvanized I'm gonna be very
careful I'll show that next
no very good nor not I'll see a red light on this side
well it's just if you're not on we do this cool look I'm just going to tap
this I'm going to tap it in here and then I'm going to take it outside and
weld it up the rest of it because this galvanized wounded well it puts off the
poison that is bad to inhale so I'm gonna doing here is tacking and then
dragging a welder outside the door there behind you and finish welding this stuff
okay the welding's done that that much anyway I don't want to get any closer
than that because that I want you to see my sloppy welds
next I'm one of that piece right there I must
square off this end that's facing up it's a crooked score a line all the way
around it and torch it off and hit it with my grand or a little bit smooth it
up and that's going to be the outer chamber of the rocket stove okay it's
probably use twenty dollars worth of gas could but it's cut I'm fixing to take my
grinder I'm not the the rough edges off and flatten it some so when i weld my
flat steel across it I don't have that much to to fill up with my welding wire
because that's pretty expensive too so uh I'll show you how I do this case
you've never seen it done it'll be loud you might want to get that volume
get the idea I got a lot more to do I'm going to get it flat and then I'm gonna
get my flat steel out here trace it cut you put it up here and ride it a little
bit make sure it fits flush and then I got to cut my hole for the pipe I'm
gonna have going up the middle and I'll show you that I can't do it okay
that's flags I can hit I'm uh want to cut the day in downtown and maybe the
hole for the pipe okay it's coming together somewhat I got the hole cut for
the pipe I'm gonna fixin to cut that flat steel there at that line and the
remainder will be the top I'll cut a hole in that for the pipe here and I
can't weld it all together till I get some vermiculite but I can see myself
painting this and maybe cooking on the tomorrow I'll see you