hi guys and welcome back to SITENG where you can see all interesting engineering civil engineering
site engineering stuff and in today's video guys we're going to try jump on top of the deck if
it's ready for us and i'm going to show you how to market and all the stuff you need to know to just
be ready for it and obviously later we're gonna have a look at the drawing and we're gonna make
sure we got all the information here we're gonna put it on the instrument and there we go so just
before we go guys please don't forget to subscribe to my channel follow my linkedIn page as well and
check my Kofi page also so let's go so a few people ask me just how to set the laser how to do
it i thought i explained the on the previous video but i just before we're gonna jump on top i show
you this guys you see the carry on with the deck in there and i got the laser here so i turn it on
and what we're going to do guys obviously we're going to look for the height of the laser first
so that's the height of collimation so guys you see the laser to put the data before
using the survey so data is going to be your level here whatever level you're going to be doing
you'll have to put your datums using the survey program you can check this on my
videos covering the settings and actually i recommend you to jump on my setting out
levelling video when i'm going to cover in the laser
difference between your datum and that laser here so uh that distance you're gonna measure with the
tape once you got your height of collimation obviously that's what i covered in last video
we got a socket level and we know our build up and that's that's what we're gonna be setting on
there on the staff so we're gonna put them later uh we're gonna put the receiver on the stuff
and guys gonna be ready to go i just maybe quickly show you how they check it
later i call it datum obviously whatever level you're gonna be doing uh wherever you wanna be
you need to set your edm first ones the column ready once the columns are done and then you're
gonna be setting datums and uh the more datums you're gonna set it better for you the easiest
as you can see it's quite dense here now so if you're gonna set your laser behind that column
you might not see this datum here so uh i would recommend obviously put some datums on the core
on each side of the core and then maybe a few perimeter columns to make your life easy guys
so yeah i just quickly show you when they're going to be levelling this and we jumping up let's go
look at these guys uh people who will be living here they're gonna have a nice view here
but anyway let's go back to the game i'd like to show you how to mark the deck in here but look
chip is still working they're not ready yet so uh i'm gonna show you just on this bit here but
as you can see they're finishing off they're actually installing the combi safe there so
once it's safe you can you can go there and you're allowed to go there but if there are any steps to
be marked sometimes they need to be marked before you jump in there so you need to give your prism
maybe even to chippy or set up your edm so you can shoot the laser and show the chippy where
the step is or give him some line offset line and let them measure so guys unfortunately not gonna
jump on the deck today but i'm gonna show you how to set up your instrument we're gonna have
a look at the drawing at the the most important information what are we gonna be actually marking
i'm gonna show you the drawing later and now i'm gonna show you just a few lines here and
i'm gonna jump on other drawings when i had more time to have a look so you can have a look guys
as well what to mark and what information is needed once you jump on the deck so let's go
just to show you when the decking is ready and i showed you everything
you're going to be marking we're using a service with the monopod
like this to set the edm obviously you cannot set up your edm on the decking that's not going
to be moving uh you cannot do it decking is not a stable surface so you need something like this
and then you set up your edm on it as you can see the level there uh that can only
guarantee a smallest error so when you pour in the columns you need to install a pipe like this
always guys if you if you got a chance if you don't need to use it actually it is even better
than the monopole here you can set your legs like this on the core walls or wherever that's
the setup it looks a little bit dodgy but it's a good way anyway it's as you have to remember on
the monopod it's always you're gonna have some movement and the accuracy going to be less so
i would say this is a better setup if you can do so obviously if you've got a core there
port and no movements so guys as i showed you uh that's the survey board for the instrument here
and you're gonna be setting out the lines here and all the boxes everything the balconies obviously
the lines for the balconies all the stuff so i'm checking myself now but that would be your job
when the deck is open obviously as soon as you can get in you're going to be marking all this
you're going to be marking the boxes obviously everything is on the ga and obviously later i'm
going to jump on the g doing and i'm going to show you everything so you're going to see what
i'm talking about this is the so the prica is already in here we got the boxes as i said so
that'll be the main job guys just to set the slab edges really uh that that can give a start for the
fixers and start for the chippies to install the balcony connectors and all these things and then
boxes boxes and boxes again uh the most important thing not to miss anything here guys
and uh obviously you can once your edm is here you can do the spot check of the of the level here of
your decking as well as this is going to be your soffit especially when something is sitting on it
that should be the proper level so you see you can do some spot checks as well with the edm
and obviously guys after you mark your decking before we pour guys that's the last chance of do
the pre-pour just go have a look and in terms of checking the steel you can you can see my video
about the rebar checking that the pre-poor video you should be seeing the link now to this
so you can have a look how i'm doing the pre-poor inspection here as my main role uh here was the qa
inspections but as a setting now the engineer obviously once you can set up your edm there on
the previous pour if you got the concrete if not as i said they're gonna be monopod or the tripod
and you can actually shoot this with a laser you can shoot your slab edge in this case
that's going to be shutter but that shot are going to be your slab edge so you can shoot
it just double check if the position is correct you can quickly have a look if the boxes are in
the position just count the boxes how many they are and all that stuff that man is happy there
and that would be all guys and obviously just when the concrete coming
uh your job gonna be just to set the laser and the guy's gonna do the rest as i said all this
cover all this stuff that's that's the rebar pre-poo inspection you can see on my other video
and then guys after this sport obviously we're going to have a look we're going to jump on top
and i'm going to be next video when i'm going to show you doing the surveys and
marking the columns and all the stuff so guys the first drawing i'm going to show you that's
the GA drawing is actually the most important drawing for us here uh doing the setting out
and the site engineering on site obviously we're going to have a look at the sections
i show you actually the section on the rebar drawing and then show you the cast in detail as
well as this is very important but the very first thing guys we're going to be doing on the deck and
actually below as i showed on last video we try to mark all these steps so all that dash line here
showing the step in the soffit in the soffit of the slab so that's going to be actually the step
made by the chippies in the decking so that's going to be our decking line is this one here
and the same story here guys you can see there's a dash line here and dash light here so that means
they're going to be something and we got it here as a bb and so we can actually have a quick look
in the legend uh what the BB stands for so that's the downstand here downstand beam 200mm by 650mm
deep so we have to have a look at it and obviously at these things we need to have a look before we
even start doing the decking and then we're going to be marking this so that line gonna be marked
by us once on top of the deck to to make a real step in the slab but but obviously that's the time
guys uh in my last video once we're doing the decking uh we need to mark it we need to make
sure chippy knows this obviously they got they got the temporary walls drawing which should
correspond to this drawing but that's the way we want to keep an eye on it but once we are now on
top of the deck we need to be ready just to mark that line so obviously all that information guys
you can find it uh on my setting up series drawings how to bring the drawings into the
instrument how to bring the information into the edm so i'm not going to repeat in this
uh guys on my side they're using ts16s so they are bringing all the drawings here and then just
they just tap the line and and they do a setting out so that's how it works really here guys
and then uh once you got the step obviously all other information here as well so that's all boxes
here all these boxes uh we need to know position of them we need to mark them on the deck and then
as you can see before they were all every installed on the decking so all this
you can see dash line here so that some columns dying off and on this deck actually guys here we
got the new columns as well so once the rebar is set that will be your another job just to set the
position of new columns or the new starter bars can be installed but this is after the rebar is
installed after top mesh is installed so you can actually mark it on the rebar and then the
fixtures can fix the new starter bars so what we got guys in terms of the boxes actually you
got the sizes of the boxes so what you could see on our deck in here the boxes are ready made but
sometimes the box is going to be made by cheapies so before you're going to start going on the deck
and all this stuff you can actually check how many boxes you need and what sizes of boxes you need
so for instance let's take these two boxes you got 1400 by 200 and the other box is going to be 1275
by 200 so depending on job i was sometimes doing a whole list of all the boxes needed for particular
slab for particular pour i was doing the like list of the boxes needed so the chipie could actually
prepare the boxes if there wasn't uh ordered already made so uh yes that will be also all
information is here in terms of setting out you need to all mark it and then have a look later
and make sure all is in and in this case guys actually that's the part we were actually doing
so that the king was ready so i'm gonna actually show you the section through here and you see the
section one one so you can see the section here so that's what i'm saying so that's that's that's
your step in the soffit and that gonna be later step on top so that's that's the line you're going
to be marking here once you're on the decking and that was the dashed line on the previous drawing
that would be good to have a look at the whole sectional information we got guys before we go and
i'm going to show you one more drawing as on this decking actually guys we got a castings as well
and this is the balcony castings and uh the half and castings as well so as you can see you got the
old layout here you got setting out as well for them you got sections showing you the position
and the level of the castings so in this case we had the balcony brackets which have to be marked
and and the best way to just make sure they're going to be in the position later
is to use a template but uh in terms of setting out you need to make sure they the quality is
set to the level and to the position so we got a section here showing the customs uh as i said
that's the setting out here and we got a position of the hull fence as well uh you can see the
height of it so from the top of the slab here 175 100 these have to be set on that slab edge i was
showing you you could see that actually when i was telling about shooting there shooting your shutter
to make sure your slab edge is in correct position so you can actually have a look
there you can see some of them already installed so that's the information we need guys on this
deck so obviously guys if you got any questions just please don't forget to leave some comments
let me know and i'm going to reply as soon as possible but i think that'll be all actually
information needed for this deck obviously guys once you got these drawings you need you need
time to have a look at it to make sure you know everything if you've got any questions go to your
senior engineer to your project engineer and just to make sure everything is clear and all
the information can be then transferred to site to your chippy foreman and to all the chippies
so all work gonna be done as required as per drawings so you guys i think that would be all
the information i would like to show you in this video about the drawings and then next video we're
going to jump on top so guys uh that will be all in today's video about the mark in the deck and
all the stuff guys and in the next video after the pool we're going to jump on top of the slab we're
going to do the survey and we're going to start marking column and start getting ready for the
next slap so guys thank you again for watching uh if you enjoyed it just leave the thumbs up
leave some comments if you got any questions and don't forget to subscribe to my channel follow my
linkedIn page and then check my Ko-fi page as well so yeah guys thank you again and see you next time