Welcome, friend~
Hello, I'm Gyupa.
This time , we will make a brave cookie
, the root of Cookie
Cookie, the main character of Cookie Run
. First of all, I will try to make
an old, unused cell phone as a workbench.
Because the white border is too conspicuous, apply
black
tape and apply two layers of transparent tape to the LCD.
A workbench dedicated to the 3D pen has been completed very simply.
It's a phone I don't use anyway, but
it's good to use it like this.
In Cookingdom in-game, Yongku is
a soybean that is less than two
heads tall and has a silly expression
on his face. I'm going
to make this image with a
little longer legs and a more courageous look .
Much more like the main character, right?
Brave Cookie, as you can see, is
nude without a single thread.
Since all cookies have a basic body type,
if you can make brave cookies well, you will
be able to make other cookies unconditionally.
It makes the basics stronger.
Stack the
filaments
thickly
about 7 layers according to the shape of your face
. Brave Cookies
don't have outfits or voluminous hair
like other Cookies, so you should take them even if they are thick. Stack the filament thick enough for the arms and legs in the same way .
My two sons come into the studio and
begin to take an interest in the work.
VIP customers of the figures I made.
what is it;
JJ Tube is a kids channel, so
it will be more fun for kids.
It can be so
haha
300 people
You are watching Magic, which
now has 3 million subscribers and 300 people .
Heh...heh wait... Then what about me?
Everyone please subscribe.
Now the children will know that I have only one
subscriber. Please press the subscribe button
so that I can confidently say that I have two .
Oh my gosh, thank you, Brave Guk-hee!
Aigoo old man;
Anyway, thank you so much
, did you all hit the subscribe button?
So let's focus again.
Put all the parts in the pocket oven and
press with an iron to make a smooth surface, and press
only the head additionally.
Adjusting the angle of the iron
will make the center a little more convex.
It's better to have a
slightly curved face than a perfectly flat face .
Fill the empty space on the side that is not pressed by the iron with
filament and
smooth it with a burning pen.
Brave Cookie of Cookie Run Kingdom
can be said to be the root of the Cookie Run universe.
It's the first cookie that escaped the oven by setting.
The story begins when this brave cookie escapes from the witch's oven in
the Cookie Run series.
Brave Cookie, or Yongku for short, is a
general grade cookie, and the performance was not so good
in the existing Cookie Run series .
In this Cookie Run Kingdom, the situation is different.
Yongku Deck
, which gathers enemies in one place with the knockback skill, stuns them all with
Jungle Warrior Cookie, makes them
unable to do anything, and then
pours out attacks to subdue them .
My main deck is Yongku Deck.
It is very powerful enough to easily defeat
opponents with a much higher fighting power than yourself .
Usually, in other games, if the
general grade achieves such a good performance, it is
immediately nerfed, but the
word God Dev comes out of nowhere!
Now, I made a line to dig into with the Kyupa cutter
so that the arms and legs can be connected to the body smoothly .
The connection between the limbs and the body
will be made by applying the filament B type, which
can be easily made in the joints with filaments .
First, mark the place to apply the pillar joint.
You can work much easier if
you press the marked spot with the nib of
the preheated 3D pen to dig a groove first, and then dig a
hole deeper with a pin vise with a diameter of 2mm .
Apply glue to the hole on the body side
and insert the raw filament.
Cut it to a length of about 5mm and
melt the tip slightly with a lighter.
The raw filament diameter is 1.75mm.
As the tip of the filament melts and forms droplets, the
diameter slightly increases and is fully fixed in the 2mm hole.
If you fix it like this, you
can move it while it is firmly fixed.
Actually, it's finished in this state, but since the
main character is Cookie, let's be a little more greedy.
It
made me run right away.
We'll put hip joints in his legs
so that Brave Cookie can run to his heart's content .
Mark the place to divide
and cut along the marked line using a scallop cutter.
Now, I will remove the hip joint and curved the angled corners
for rotational movement of the joint .
Cut a large corner with a nipper and
grind it gently with sandpaper.
Does it move smoothly?
great!
Insert the leg into the hip joint and merge it
with the body, and drill a hole across the hip joint and body.
Then, I put a pin in the hole and close it with a
filament. I
finish the blocked part with sandpaper, and finish the
rest of the parts with 400-grit sandpaper
.
I 'll put a magnet in my hand to hold the
lollipop stick .
Punch a hole in your hand and
insert two small magnets.
After drawing the two thickest lines like this for the stick, hold the
flat sides facing
each other, and then rub the outside with a fire element to attach them to each other.
It is perfect
if you turn it lightly by hand while it is hot .
These hairs are drawn at once, and the
skull-shaped button squeezes the
filament slightly, presses it with a ruler, and creates a shape with the scallop cutter.
It also provides eye sockets.
It's cute~ Apply
heat with a lighter to shape the wand too.
Although it was not shown in the video, a
magnet was also planted in the wand.
When planting a magnet, be sure to remember
the directions of the N and S poles
carefully before planting .
Now, let's do the coloring.
Since there are holes in all the parts, I
will insert a filament and make a handle.
That sense of anything that pierced
tits and screened, and ...
I'm saying that's not naked.
It's official that being naked is recognized, and
there's no way the cheeks are vertical, so it
's like a bare body piercing.
But I'm not brave
enough to pierce my body. When the
paint is dry, I attach my hair and style it with a
hair dryer. The face
can be drawn easily by sketching it lightly with thin white paint and
drawing it
thickly. Draw the
strawberry jam and
blueberry eyes.
Brave-looking eyebrows are made of filament and attached.
Lastly, attach the controversial skull button and you're
done.
In fact, Brave Cookie
could have been made very easily
because of its simple design,
but as a courtesy to the main character, I made it as high as possible.
It is also a Gyufa Challenge product.
If you hold this posture, you
can stand on your own.
That's really cool!
With no decorations , there's nothing but brave Cookie that's
this cool figure . It might look cool
because of the bravery that
radiates from within. I want to see
Brave Cookie with the
three Epic Cookies without fear .
are you okay?
I'm going to try it once~ I'll add
it and dash bravely!
Everyone stay away~!!
Oooh! Bravely win
! Go with this momentum!
do you like sweet
All cookies are crispy and sweet.
Let me tell you the story of my escape.
The oven was really hot.
I don't even know how I could run like that.
In fact, running doesn't give anyone a chance~
Running is the best!
I'm not just a cookie~ I'm
the bravest cookie.
What's the secret to being brave?
Perseverance and hard work are the source of courage.
You have run bravely so far!
Ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much clothes!!
Let's run together!
will you come with me?
I think it will be full of wonderful things if I'm with you~
I'll take the lead~
Follow me! Everyone in Cookie Run Kingdom
get out of the way~!!
Then please look forward to the next video.
thank you.
Everyone stay away~!!!