Dear Fellow Scholars, this is Two Minute Papers with Dr. Károly Zsolnai-Fehér.
I would like to show you some results from the area of 3D printing, a topic which is,
I think, a little overlooked, and show you that works this field are improving at an
incredible pace.
Now, a common theme among research papers in this area is that they typically allow
us to design objects and materials by thinking about how they should look.
Let’s see if this is really true by applying the Second Law of Papers, which says whatever
you are thinking about, there is already a Two Minute Papers episode on that.
Let’s see if it applies here!
For instance, just prescribing a shape for 3D printing is old-old news.
Here is a previous technique that is able to print auxetic materials.
These are materials that we can start stretching, and if we do, instead of thinning, they get
fatter.
We can also 3D print filigree patterns with ease.
These are detailed, thin patterns typically found in jewelry, fabrics and ornaments, and
as you may imagine, crafting such motifs on objects would be incredibly laborious to do
by hand.
We can also prescribe an image, and 3D print an object that will cast a caustic pattern
that shows exactly that image.
And printing textured 3D objects in a number of different ways is also possible.
This is called hydrographic printing and is one of the most flamboyant ways of doing that.
So what happens here?
Well, we place a film in water, use a chemical activator spray on it, and shove the object
in the water, and…oh yes, there we go!
Note that these were all showcased in previous episodes of this series.
So, in 3D printing, we typically design things by how they should look.
Of course, how else would we be designing?
Well, the authors of this crazy paper don’t care about looks at all.
Well, what else would they care about if not the looks?
Get this, they care about how these objects deform.
Yes, with this work, we can design deformations, and the algorithm will find out what the orientation
of the fibers should be to create a prescribed effect.
Okay, but what does this really mean?
This means that we can now 3D print really cool, fiber-like microstructures deform well
from one direction.
In other words, they can be smashed easily and flatten a great deal during that process.
I bet there was a ton of fun to be had at the lab on this day.
However, research is not only fun and joy, look, if we turn this object around, ouch.
This side is very rigid, and resists deformations well, so there was probably a lot of injuries
in the lab that day too.
So, clearly, this is really cool.
But of course, our question is, what is all this good for?
Is this just an interesting experiment, or is this thing really useful?
Well, let’s see what this paper has to offer in 5 amazing examples.
Example number one.
Pliers.
The jaws and the hand grips are supposed to be very rigid, checkmark, however, there needs
to be a joint between them to allow us to operate it.
This joint needs to be deformable, and not any kind of deformable, but exactly the right
kind of deformable to make sure it opens and closes properly.
Loving this one.
3D printing pliers from fiber-like structures.
How cool is that?
Example number two.
Structured plates.
This shows that not all sides have to have the same properties.
We can also print a material which has rigid and flexible parts on the same side, a few
inches apart, thus introducing interesting directional bending characteristics.
For instance, this one shows a strong collapsing behavior, and can grip our finger at the same
time.
Example number three.
Bendy plates.
We can even design structures where one side absorbs deformations, while the other one
transfers it forward, bending the whole structure.
Example number four.
Seat-like structures.
The seat surface is designed to deform a little more to create a comfy sensation, but the
rest of the seat has to be rigid to not collapse and last a long time.
And finally, example number five.
Knee-like structures.
These freely collapse in this direction to allow movement.
However, they resist forces from any other direction.
And these are really just some rudimentary examples of what this method can do, but the
structures showcased here could be used in soft robotics, soft mechanisms, prosthetics,
and even more areas.
The main challenge of this work is creating an algorithm that can deal with these breaking
patterns, which make for an object that is nearly impossible to manufacture.
However, this method can not only eliminate these, but it can design structures that can
be manufactured on low-end 3D printers and it also uses inexpensive materials to accomplish
that.
And hold on to your papers, because this work showcases a handcrafted technique to perform
all this.
Not a learning algorithm in sight.
And there are two more things that I really liked in this paper.
One is that these proposed structures collapse way better than this previous method.
And, not only the source code of this project is available, but it is available for you
to try on one of the best websites on the entirety of the internet.
Shadertoy.
So good!
So, I hope you now agree that the field of 3D printing research is improving at an incredible
pace, and I also hope that you had some fun learning about it.
What a time
to
be alive!
Thanks for watching and for your generous support, and I'll see you next time!