Wacom Cintiq Pro 27 - Install the stand
Okay, let's unbox the stand.
Here are the integrated cardboard handles which you can use
to comfortably pull the stand out of the carton.
Let's do some unboxing.
This is the Cintiq Pro 27 Stand box.
Let's have a look what's inside.
As you can see, everything is made of sustainable materials.
Let's get rid of these things here first.
Now we have one part, which is the center assembly of the stand.
This is a bit heavy, please be careful.
This is the stand base.
This is not that heavy. Put it aside as well.
Don't forget the accessory box on the side.
This contains some screws and assembly parts
plus the QuickStart guide to help you set up the stand.
This is what you find in the cardboard box you've just unpacked.
This is basically the base plate, the arm
and the pivot plate, which will be mounted at the back of the Cintiq Pro 27.
Then we have some smaller parts here.
Some of those are packed into a woven cloth bag and into a paper bag here
We have the QuickStart guide as well.
Let's start with the base stand assembly now.
I have the arm here in front of me on the desk.
I have the base plate here and I take six of the screws.
Let's see how it works.
First, I take the base plate.
Here you'll see these guide rails and it already holds steady in here.
Now let's start fixing the screws.
There's six of those screws.
You can use the tool which is part of the box contents as well.
Make sure that you fix all six of those screws and tighten them steady.
This is the last one.
We are done with that step.
All the six screws are tightly fastened.
In the next step we will install the pivot plate to the main display.
I put the Cintiq Pro 27 display flat on the table.
Please make sure that you have a soft cover
and do not put the display directly on the table.
I'm using here the cloth you will find inside the Cintiq Pro 27 box.
Second, you will see the four VESA100 mount options at the back of the Cintiq Pro 27.
In our next step we will mount the pivot plate from the stand.
Please make sure that you install it in the right orientation
with this part oriented to the upper side.
Then we will take four screws and tightly fasten the four screws
by using the VESA 100 holes in here.
Again make sure that you have fixed the pivot plate in the right orientation
as indicated in the QuickStart guide.
After we have successfully installed the pivot plate to the Cintiq Pro 27 display,
we will move it carefully over the stand and insert it here in the arm.
The last and final step of the stand assembly is mounting the VESA plate stopper.
This is fixed with two screws.
The screws are already pre-attached to the plate.
Just gently screw it to the pivot plate.
Finally you will have the plate cover which can be fixed.
We are done.
Let's look at how to adjust the Cintiq Pro 27 on the Cintiq Pro arm.
To unlock the adjustment, just pull down the slider
and now you're free to change the inclination and the elevation of the stand
by holding the Cintiq Pro 27 firmly at the sides using the grip areas.
If you have found your favorite position to work,
just pull up the slider to secure and lock the Cintiq Pro on the stand.
Then you also have the option to rotate in each direction.
If you don't want rotation, you can always lock by using the slider on the back side.