Hello!
My name is Andrew Jones, for a while now I have been looking at the free energy machines
on YouTube, on internet and have seen there is a lot of controversy, a lot of arguments
and a lot of conflicts and opinions about what works and what doesn’t work, what won’t
work etcetera.
So i figured out what I will do is, to create a build of an attempt to make free energy
gravity fed electricity generating machine, so it won’t be a solar machine, it won’t
be a wind powered machine.
I am not even sure if I want to even add one single solar panel, am not even sure I want
to add even a wind turbine.
I think I want to prove out the concept initially of a gravity fed device.
Now there is a video that I saw a machine years ago, now this machine was a weight that
was hoisted in position manually, then over the cause of a couple of hours, the weights
will slowly lower, now this weight was very heavy and the distance was quite a distance
is like ten or twelve feet, so reverse from the very top all away to the very bottom,
it was geared on shaft, geared to another shaft, but it wasn’t a true perpetual machine,
because the device has to be reset every single time the weight get to the bottom.
Now there is a video on YouTube where there is been some quite vicious fighting going
on with some of the frames, I am going to put in the background, actually behind me
right now you will see a frame or two of this actual unfinished machine, the guy said it’s
a free energy generator that he invented, I have seen this device some years ago and
much better made, but it is great to see people jumping on this type of thing.
So I applaud his efforts.
You know, my interest came about two years ago, I live in Northern New Jersey and what
happened was, there was a really bad storm a couple of years back and we were without
power, I have forgotten what time of the year it was, I think it was cold, so it was getting
towards the end of the year possibly, we were without power for almost a week to two weeks
and during that time because I invent, because I design, because I am always coming out with
things, I used the bathroom just then and when I was in the bathroom, I invented something,
because I saw an issue.
I will do a separate video on that, because I don’t want to give it away, it’s going
to be a funny one, but I wanted to design a method that will create electricity, when
there is no other means, so you know the whole wheels will start turning and I remember this
video which is a good basic, the one behind me, a good basic understanding of beginning
point.
There is a lot of financing that has to be done on this particular method, so what am
thinking of is I sourced out some miniature gears, I initially dropped the design, this
is the 22nd gear, I dropped a design, the one behind me now I realized that as I was
looking at it, that some of the math was very incorrect, so the gearing was correct, but
the weight needed to actually, because here is the thought; A weight through gravity pulling
the weight down, pushing the weight down however you want to look at it, it rotates because
if the cable rotates a master gear, that gear is then geared to a smaller gear which you
end up like the image behind me, though gearing ends up spinning a spindle on the very end
at about and here is the dilemma.
I have to look up the actual RPMs if I am going to use an alternator.
An alternator I think uses up to about 21/2 or 31/2 times RPMs before it originally start
generating enough electricity to recharge a battery.
So the weight will fall, the gears will turn or make the spindle on the very last geared
action, it will turn that spindle enough RPMs to turn the alternator, which does not have
a zero balance for low thrashing turning, you actually might need to pour a pound or
two pounds worth of force to get that thing going, so, if it needs one pound of touch
to actually rotate the actual alternator, that weight will be geared up, so you are
not sure you are going to be using fifty per cent weight as in this particular video behind
me, so all that needs to be taking into consideration.
Now my thought was initially to make this device and have it sold out after an hour
or two hours, you will lift the weight all the way to the top again and then it will
again run into a cycle.
The thing is when you sleep, after an hour or two, it’s going to run out and it’s
going to stop charging the battery or the range of batteries.
So what I was thinking of is having a reset system and how will that be possible?
This is the kicker, you have to make it a way so that it will reset to the very top
again using only the kinetic energy created from the weight being lowered from the very
top to the bottom.
How can you create enough energy to raise that weight back to the top?
I have my absolute beliefs and thoughts on this so I am not going to reveal my thought
on this in this video because it’s going to be interesting to see everyone's thought
on it, this is where the invention part comes in, this is where the I want to prove things
out and do what people have suggested to see, will this work, as per other people's suggestion?
Who knows?
And none of them have done it before but I want to see them prove this out to see, you
know what can be done.
So that’s it, just a bit of a teaser right now, over the course of next week, am going
to start putting things together, I will record it, so this time next week, watch out for
another video in the build of the free energy gravity fed electricity generator perpetual
motion machine device.
Alright, that’s it, thanks for watching, and come back to see the results, I am probably
going to have to create a playlist for this and create a bunch of videos to prove out
each and every one of the concept that are been from away.
The issue might be escaping all of this because this is a lot smaller than this behind me,
so I need to do it right and I need to do it sensibly, and I have to do a little bit
of research just to find out what are the scaled values of something of what I am showing
behind you, what are the scale values of that.
So, let’s see, come along for the ride, please subscribe, I will see you all in the
next video.