hey guys rolando from revemoto today we'll be doing an install on a 2015 infiniti q50
passenger side fender if you guys like this video go ahead and like and subscribe to our channel
turn on that push notification and if you guys need any pre-painted auto body parts for your car,
go to revemoto.com so let's get started all right so the next step would be to take off this
headlight right here so we can get to the fender there's going to be a bolt right here a bolt over
there and i believe another bolt right here so it's going to be a 10 like that take this off
to get to the bolt right here just basically the top
and it's just held down by these planks right there
all right so the other bolt that i said was like someone right here is actually
right here that one right there i believe but it's broken so i can't show you guys how to take it off
but there's another boat right here so once that's off you can go ahead and remove the headlight
so unplug it
i was having a little hard time but
it's just a clip right here and you press down on the top part right here
and it'll come off all right now that we have the headlight out we're gonna go ahead and take off
this little cover over here so we can get into the bolts on the top of the fender right behind that
cover this is this this little push pin right here we're gonna take that off with a flathead
maybe something like that
and then you can just go ahead and take this off
so whenever i take off the fender i like to tape up the hood and the door
let me show you guys that so just get yellow tape or any type of tape
i do this so in case i hit any of the parts i mean if i hit the hood or the
door it doesn't dent it up all right now we're gonna take off the fender liner
underneath the uh fender first we're gonna turn the wheel facing this way so we can get the
screws off right there and go inside the fender liner with some of those push
pins they have all right so now we're going to take off the screws right here with a phillips
there's going to be four of them then when all the clips are removed underneath
now you can take off the fender liner
oh there's actually one more underneath right here it's going to be with a 10 millimeter
so it looks like that now we can take out the fender knife so underneath the fender liner
with this one being destroyed like how it is the clips fell fell off during the accident so
i'm just going to show you guys what it looks like it looks like this
that's going to be underneath the fender liner and then
right down there i'm gonna have screws and push pins i believe right here too
all right so underneath here there's gonna be screws that we need to take off all along so
that's going to be i believe a 10 millimeter also so get another 10 millimeter and we're
gonna take off one two three screws right there and they look like this there's three of them
if you guys have one of these use these uh panel removers so you can go in between the fender and
the uh size coat right there but if you guys don't use something uh plastic so you guys can pry that
up that side skirt off so let me show you guys how that works open the door so you're going to want
to get right in between right there with something like this so you guys can uh pry it right out
it's basically the side skirts held on by these little just like prong looking things plastic
so our next step is going to take off these bolts right here so there's one right here and then
one all the way back there it's gonna be a 10 millimeter so on this one right here i'm
gonna use something like this so we can get in between and then over there we're gonna get a
a soccer wrench with an extension to get that off so on this screw you don't have
to get all the way off just uh kind of loosen it up so you can release the fender from the
bolt itself on this one right here we're going to take it completely off
so that bolt looks like this
so now the next step is right here there's going to be one two bolts
when you push the uh size clips down so that's gonna be a 10 millimeter
so now we're gonna take off the bolts on top
i'm gonna start from the top and one right there one right here over here
and one right here
there's like four bolts all right so now we can go ahead and remove the fender
all right so the next step is putting these accessories back on the new fender
all right we're gonna get this bracket off it's gonna be a 10 millimeter
so
there's bolts right here see like right there i believe they go with the headlights
so on the bottom of the fender you have these things basically go to the back
push them out so all you have to do is press down on this and then push it out
it's on these right here use like a flathead or something a panel remover like this
you have these clips right here and you just kind of wear something on the top part
i'm going to come off
all right on the new fender we're going to put back all the accessories we're going to start off
on the bottom it's going to be these clips right here all right we're gonna put these clips back on
then we're gonna put these clothes back
on
so i forgot to show you guys this one right here because the fender was all bent up
but basically there's like the screw it looks like this right here and you take it off
and just kind of pry this one off too now we're gonna put the bracket on
so
all right now we're gonna put the fender on but one thing you're gonna do is on this corner right
here slide the fender in so it's in between the bolt and the actual frame of the car and
then right here make sure the fender goes over this so towards the back facing you this way
because you're gonna have to screw that uh screw inside here so let me show you guys how that works
before i screw anything on i'm going to put one bolt on top so
it holds the fender down while i work on the back end
so right now the fender should look like this the front of the fender you should have the fender
lined up with this bracket right here so now the holes all line up
and right here is what i'm talking about
see how that fender is in between the bolt and then let me open this up
and then right there right on there right there you can see like the fender is behind it
not in front of it a lot of people uh have that uh issue because they forget that that
finish supposedly behind that uh bracket not in front of it so once you guys have
that lined up like that i'm gonna go ahead and bolt it up so now i'm gonna take off the tape
so i'm gonna do is i'm gonna check the gaps basically make sure
they're all lined up properly so now i'm gonna put the bolts once uh i like how is lined up just
right now temporary i'm gonna go ahead and put the bolts down here i'm just gonna hand tighten it so
right here there's a bolt that i'm gonna have to put in so just get an extension of 10 millimeter
so i'm gonna go ahead and tighten this one up because the gaps are all even on this side
so remember you can always adjust it accordingly but once you have adjusted go ahead and tighten
it up before i tighten anything up i'm gonna go ahead and close the door back up
i like to compare it with the other side all right so now the gap is good like i open and close it
it's not hitting anything
and i also compared it to the other side and it's all lined up just like how it should be
the gaps are even all right so before i do anything else
i'm gonna put the hood down and make sure the gaps are lined up right here
so as you can see there's like huge gaps right here so
just push so i know i won't have to push it in that's a little bit like that
all right so it's kind of lined up i'm gonna go and put the bolts in and recheck it again
all right so i'm gonna put those bolts in going to close the hood again and re-check that
gap check the other side it was hitting here a little bit too close so i just pulled it
back and now the gap is lined up so now i'm going to go ahead and tighten it up
then we check it again just to make sure nothing moves
all right looks good so now we're gonna
take the side skirts and push them in they should just clip back on
and then just all right so we're almost done with the fender he's gonna go ahead and put that
bolt right there all right guys so that's how you install a 2015 infiniti q50 passenger side vendor
it works for a 2014 all the way up to 2016. so if this video helped out a lot go ahead and like
subscribe and turn on that push notification if you guys need any parts for your car go
to revemoto.com your pre-painted autobody car source if you guys have any questions
comment down below and we'll go ahead and answer answer those questions thank you