Hi everyone, welcome back to geardo
Today we will show you how to replace the battery on the iPad Mini 3.
Before Starting, we need to have the right tools to proceed with the repair,
which You can find in the description.
Proper heating requires for iPad screen removal from the body.
For this, we use a heating pad designed for tables and mobile phones. On iPad devices,
make sure to heat the front side of the iPad. Select the Tablet heating option and leave it
till the heating completes. Alternatively, you can use a heat gun or something similar.
Once the heating has completed, use a suction cup on the sides to lift the touch screen. In between,
Insert a few Plastic pickers or card pry tools and cut the adhesive around.
Be gentle while pulling; there are flex cables attached to the logic board.
Next, lift the touch screen to 90% from the top,
and then remove four screws securing the lcd screen.
Next, lift the lcd screen to 90% from the top.
Next, take out the lcd plate by undoing seven screws.
Next, take out the shield by undoing four screws.
Next, disconnect the battery plug,lcd plug,
and two touch screen connector plugs from the logic board.
And then gently take out the lcd screen and touch screen from the body.
Next, To remove the battery, first loosen the adhesive by applying heat.
For this, you can use a heat gun, heat pad, or something similar.
Next, cut the adhesive under the battery using a plastic pry tool or something similar.
Be gentle in this process and take out the not working battery.
Next, Place the new battery in the body.
And for testing, connect the battery plug and lcd screen to the body
once the testing has passed. Install the new battery with adhesive.
Next, place the touch screen by securing two plugs.
Next, place and connect the lcd screen.
Next, turn on the device for testing by connecting the battery plug.
Next, place the shield by adding four screws.
Next, place the lcd plate by adding seven screws.
Next, secure the lcd screen by adding four screws.
Next, clean the lcd & touch surface for prints and dust.
Next, Before clamping, verify the screen has enough glue; if not,
use b7000 glue or double-sided adhesive
Finally, we are using screen bonding clips to tighten the screen to the body.
If not, you can use rubber bands and leave them for some time.
Hope you have enjoyed the replacement guide.
Let us know if you have any questions; please like, share, and comment on our videos.
Do not forget to hit the subscribe button.