hi hi hello hello assalamualaikum warahmatullahi wabarokatuh see you again with
the black builder id channel reference channel for do-it-yourself Ok in this video
I want a tutorial and review on finishing using products from Mowilex Well coincidentally what I want to
review this is Mowilex woodstain which is scattered yes, so here I tried three layers
, the first one I will start with wood filler mobiles too And this also scatters water then
after application for the filler I apply woodstain for the walnut color one then
the last layer I give clear chord The blouse from Mowilex also yes, so how do
you think about it and what are the results Before we start don't forget Krapyak friends
to support me to be more enthusiastic in making videos that are useful for all of you
good Let's execute it Oh yes And for the first step we do is do sandpaper
against the workpiece by using sandpaper great 2 After that, we clean the remaining sanding residue
or dust from the workpiece before we apply the first application,
namely Mowilex woodville Ar wood filler, so the function of uh filler is that in general
it closes Gayo pores where when we want to use with filler it means we want
phosphor finishing, i.e. the pores are closed, if without ultilar, it means Open power.
The main function of this snake is that it will give a perfect final appearance
if the application is correct, so an example is to minimize the adhesion of the paint on it. Then
to flatten or smooth the surface . wood to be more effective Then for the power of the color
it will be more evenly distributed and others that's the function of wood filler and for
this application it's at least twice, yes, maybe once is good, maybe you can, but my advice
is, just a little, just think about it if it's okay please continue to the next layer
hi hi hi for we can mix the application of wood filler with
10-20 percent water and it can also be without water, yes and for the application to the wood we use
a couple knife and we have to make sure the entire surface of the wood is covered with
wood filler and after that we wait for about 1-2 hours Yes while we are waiting to dry
here I apply wood filler to another workpiece, namely camphor wood
and here it is the same color as camphor wood, and besides that I also
sandpaper for the wood which I will finish with wilex without using UC pillar
Hi this is a goodstein mobilegs it scatters water and this is it the material is acrylic yes it is 100%
water based acrylic so it also contains Pixy oxide pigment so it gives the appearance of the
wood color being transparent and the fibers will be more visible yes that's eh the type of
finishing osteen yes Oh yes And for the advantages of this mobile website it protects the wood from UV
rays traviolet and weather means that it can be used for the exterior, but the application without out filler
then prevents fungal and insect attacks, which means that it provides durability to the substrate
that we finish with Mowilex woodstain, then repels water and the effect is like
taro leaves, then it is odorless and toxic and the water diluent that means it is friendly to
health compared to solvent-based paint Hi and for applications from
this forest it is 2-3 times the more the application automatically the color will become darker
Oh yes And for the application of Mowilex woodstain here I chose walnut color and for the ratio
mix it with water Then I mix 10-20 percent of water and mix it well
and here it is the first time I apply it to the workpiece that I chose without using
wood filler, namely Dutch teak, so here I apply the first application to make sure
it touches the entire surface of the wood and after that who works in Then I tried to use
three parts of the coloring, one application, two applications and three applications and
after that for the wall shelf box that I gave the filler earlier, I sanded
it with 240 until the water ran out, until it was smooth, so we sanded it until it was smooth. until he is eh is it smooth
and the pores make sure it covers the entire surface of the wood and for the application for this filler,
here I am only once, yes And after this I am ready to do the Mowilex application
on the wall shelf box And this is also for the camphor wood I also sanded the pillars until they
run out and for the workpiece that shows filler, I sanded it with sandpaper.
Oh yes. Here I will do the second Goodstein application for the workpiece
that does not use this thread, so for the workpiece, I will
coat it four times. Then for the next workpiece, I will
coat the three parts, namely this is the k layer second, so I didn't paint it in its
entirety, only partially because later I will make a thick layer which is not
and then for the camphor wood I also give Mowilex for the first layer and
after that we wait for it to dry for about 1-2 hours which is for the workpiece We gave
the second Lex the wish earlier and after it was dry, we did the threshold sanding, actually
the sambang lamp was with a great 400 until he was an ant, so he opened it a little, like that, and
opened the dance a little, ah, we did the threshold sanding, we did the third Mowilex woodstain application
. for the workpiece, this example is the Dutch teak workpiece, yes. This is the application.
Hi, the vacuum is the test for the one that works, it's also the third application, but the bottom one, so
here I can see the difference between layers of 123 and then for camphor wood, it's the same and
after that Eh, I dregs it again for the fourth layer, yes, for the fourth layer, which appears
filler. Then for the third layer, which is g with camphor wood Sorry, the second layer is for the
camphor wood Hi and after that the steps are the same I will wait for it to dry for about 1-2 hours and
then for the box shelf this is the first Gis mobile application Yes make sure the
Mowilex website touches me all over the wood surface until he touched the entire surface of the wood
Oh yes here I am using a brush ma'am because this is just a water destroyer,
so I also don't use spray and because I think it is also quite effective
by using a brush, yes, after that we wait for it to dry 1-2 hours yes, for the car product here
Hi and after that for the boxes we sand the threshold too Hi before we do
the second application, namely without Sambong with great 400 and make sure the entire wood surface
is Trump plus to the maximum, after that we apply the second one and here it's
a darker color from the first layer Yes, as we saw on the other workpiece
earlier i that the difference between the first layer and the second layer is that
it can still be seen from the level of darkness so that the second layer belongs to become
darker and then the same as the previous step and we wait for it to dry for about 1-2 hours
Oh yes, we wait for it to dry 1 -2 hours and after that we sand again with a
great 400 with a threshold and make sure the entire surface of the wood yes for this threshold sanding
Hi and then for this third application the color becomes lip gloss again but still
shows a little bit of stroke, hi, so friends know that for this box rack
, I have installed it and then after that I will apply clear chord. Yes,
clearcoat, but before that, let's brush it off with a hundred greenpath sandpaper, before
applying the clear coat and we will clean the dust from the sanding. Okay, then for
the coating . The last one is the Mowilex clear coat or clear finish. Incidentally, the blouse
is for UK the basic material is the same as 100% water-based acrylic and it also contains
transparent iron oxide pigment, so what is called clear coffee will be for the water layer, yes, this
color result is transparent. It gives a real shiny impression, this is the blouse, and the
finishing uses this clear it's more suitable for interiors. So, if we want to
place it on the exterior, maybe it's better if only the website is without pillars and it looks like you
, if that's what I think But if we use clear, because this is basically
the same, the possibility is that he can use a product that finishes with mobileex is for the
e-business exterior Oh yes, in the Mowilex clear finishes application, here I mix
it with 10-20 percent water and for the application I still use a foam brush, yes, here
I am satisfied with the entire wooden surface for the workpiece that I
want to finish. Then for the camphor wood and for the color gradation,
namely the difference between the first application, the second third, my Western is all empty and we
wait for it to dry 1-2 hours and after that we will also do the threshold dregs using the grade
yo yah. We discuss it with get4 hundred before we do the
second clear finish application Hi and we make sure that after this sanding, make sure to
clean the remaining dust from the sandpaper and besides that we apply a second clear finish
and there the results become even more shiny than the first layer.
the finishing process with
Mowilex, yes, that's the experiment that we did. So, what is the state of the
results, I think the results are very good, okay, well, this is the result, so this is
an example of the first layer, the second layer and the third layer, so here are three layers
. coat without wood filler And the result is like this
Hey, it's beautiful, clear clea r coat, which is very shiny. In my opinion, for the size
or type of water-based clear coat, then this is four layers and the final layer is
clear code. Hi, it looks like it is shiny, ok, Hi, then this is camphor wood.
this uses UC forest filler and finally he clears the code Hi and the
second one was Dutch teak, yes and it looks like the fiber looks like
it could be better Maybe he and this application I only used a
foam brush and used a foam brush it already more than enough in my opinion, yes, and then for
the box shelf, which I finished with Black, it was like this and I have installed
this, so this one is with Willer Goodstein but it doesn't have a clear coat and the result is Yes, it's not flashy cement
if we give it a clear coat. and also mursa, the results are also pretty good, so the conclusion
that I can draw is finishing using products from Mowilex M In my opinion, it is highly
recommended, yes, and from the example I made, the result is that I am satisfied with
the
results
. don't miss a useful video from us, thank you and see you soon