Welcome back everyone.
I’m sure you must meet the situation that your iPhone stuck on Apple logo for no reason.
No matter how you try, it just keeps going back to the Apple logo.
Don’t worry, I will show you 4 ways to fix this problem, only for the iOS software issue.
First Method: Force Restart iPhone
You should try this when there are bugs occur on your iPhone.
To force restart iPhone.
**For iPhone 6s and older models.**
Press and hold both the power button and the home button at the same time.
Keep holding till the Apple logo appears.
Then you have completed the force restart.
**For iPhone 7 or 7 Plus Models.**
Press and hold both the volume down and power button at the same time, Wait until the apple
logo appears, then you have completed the force restart.
**For iPhone 8 and later Models**
Press Volume Up and quickly press Volume Down then press and hold the power button.
Wait until the apple logo appears, then you have completed the force restart.
Normally, your iPhone should be ok again, if it goes back to the Apple logo screen,
then you can follow next method.
Second Method: Fix with iTunes
To fix iPhone with iTunes, you need to put your iPhone in recovery mode first.
So connect your iPhone to iTunes.
It’s the same operation as force restart, but this time keep holding till the recovery
mode screen shows up.
Then you should see iTunes pop up a window, here we choose update.
Agree on those terms, then iTunes will begin to download the firmware that is needed.
Once the download is completed.
It will start to update your iPhone, this process will take a long time, so I will speed
it up.
Then you can see my iPhone is back to normal state again, If iTunes is not a comfortable
choose to you or taking you too much time, you can follow next method.
Third Method: One-Click Fix with Tenorshare ReiBoot
This is an iOS repair tool, it can fix more than 150+ iOS system issues, check the download
link in the description and download it.
Once installed, connect your iPhone to a Pc or Mac and open ReiBoot.
If Reiboot didn't detect your iPhone, then you can try method four.
Here we will try a one click way to fix Apple logo issue, click enter recovery mode option
here, and wait for a second.
Then click the exit recovery mode option and wait for a second.
Then you see, my iPhone is back to its normal state, is very convenient and simple.
Feel free to give it a try, it's free.
If the above method is not working, then it might be the iOS system went wrong, you can
try next method.
Fourth Method: Repair with Tenorshare ReiBoot
We still need ReiBoot here.
Connect your iPhone to a Pc or Mac, and open ReiBoot.
If ReiBoot didn’t detect your iPhone, you need to put it in recovery mode first.
Then this time we click on the green start button.
Choose standard repair, here will require to download firmware to repair your iPhone,
click it.
The download process will not be long, depending on your network condition.
Once the download is finished, click the start standard repair option.
ReiBoot will start to repair your iPhone, this process will take some time.
Be patient, do not disconnect your iPhone during the process.
Then it is done, you can see my iPhone is back to its normal state!
Go give it a try.
That’s it, hope this video is helpful to you.
I will be grateful if you subscribe.
See you guys next time.