Did you know that when setting up Windows XP the quick format option actually doesn't
do anything bad and saves you a heck of a lot of time on modern drives? I'm Dan Afonso
from Afonso Consulting and Enfold IT, and this is how to install Windows XP. Now, I'm
just going to tell you straight out, this is a fairly straightforward process, if you've
got standard hardware, any consumer hardware really. It's not really going to be a problem
for you. So, what I'm going to do is I'm going to go through the installation. I'm doing
it in VMware because bringing in additional hardware to do it is actually kind of difficult
so we're just going to do this virtual. The only difference between this and what you're
going to do is there's no CD station. So, I've already put the CD in the drive and we're
going to start up the machine. Now the first thing you're going to notice is, besides the
machine booting, is that it's going to pause here inside its loading windows. If you already
had an operating system on a machine it would ask you to push a button in order to boot.
It's also asking to push F two, F two for automated system recovery and F six for additional
drivers. Automated system recovery is if you break your machine and have an automated system
recovery disk. The F six is far more important to this. If you have an obscure raid driver,
if you have you know some sort of you know raid zero if you're a hyper gaming machine,
you're probably going to need to hit F six and pop in the floppy disk. Yes, a floppy
disk. If you don't want to make a floppy disk you'll have to make a custom boot CD for Windows
XP. We're not going to cover that here. We're just going to move on. The first thing Windows
is going to do is it's going to initialize itself. It's an informational screen that
lets you know if you want to repair, setup or whatnot. In this case we're just going
to setup, so we're hitting enter. In user license agreement you have to accept it in
order to continue on. Now this is a disk partitioning portion, if you want to use the whole drive,
the C drive, and I highly recommend you do this, unless you're going to dual boot or
have some sort of other partitioning scheme in mind, just hit enter and it'll use a default.
If you need to partition what you would do is you would push - you would push C. And
just - for create a partition. And then you could type in how much you want and you know
make multiple partitions and whatnot, then select them from the list, so for this case,
sure, we'll make a seven gig partition and then I'll create another partition over here
just to show you in general, you have really no need to do this. So create this and we'll
use the quick format NTFS, because it's significantly better. It's going to format now. So once
it's done copying all those files, it's going to reboot the machine into the graphical portion.
It's after a good long while you're going to get to the regional language options screen.
If you need to change your language, your input method or anything like that you could
customize that, but for most people this is going to be the normal, hit next. Type in
your name, and your organization. Hit next. Now you're going to give your product key,
for obvious reasons I'm not going to type in mine on camera, but we'll just type that
in and go to the next screen. All right, the next screen you get to name your machine.
And I'm going to name mine Bob. Bob is a good name. And you can set your administrator password.
And anything you want, you should probably make this something reasonably secure like
not password. The next screen, just wants to know date, time and most importantly the
time zone. Now you don't really have to set the date and time here, we'll figure that
out once it connects up to the internet. But your time zone is important, so set that,
hit next. Here on in it's going to configure your network, it's going to ask you whether
you want to do this customized, default, why don't you just pick typical, it'll get you
going for now. If you need to change something, do that later. Most people won't need to change
anything. And finally your work group. If you have set up a work group in house, feel
free to use it, if you haven't the default is fine. And from here on in, it's just going
to finish the installation. Once it comes up, all you really need to do is run Windows
update, it'll start doing this in the background, automatically. Let it finish, you should be
all set from there. This has been how to install Windows XP and I'm Dan Afonso of Enfold IT
and Afonso Consulting. Enjoy.