If you’re looking for an Ultra Tough Screen Protector for your iPhone, why
not try this Armorite Screen Protector from ESR Hi guys, it’s André from Conveyor of Randomness
and today I’ll be showing you how to install and protect your iPhone screen with this Armorite
Tempered Glass screen protector from ESR, who I would like to thank for providing this for me to
review and also for giving viewers of this video a discount code on all ESR iphone 13 series products
which I will give to you later on in the video. Let’s get over to the unboxing and installation.
This is my iPhone 13 Pro that I’ll be putting the ESR armorite Tempered glass screen protector on,
described on the box as the ultimate screen protector,
with this installed you will be able to withstand 110lbs or 50 kg of force applied to the screen
and with the screen coating should minimise fingerprints and scratches to your phones surface.
If you have got a case on your phone, you will need to take it off first
so the frame can fit around the phone. In this nicely presented box you will get,
the easy installation frame that allows you to align the screen protector onto the phone,
2 screen protectors, a rubber mat which provides a non slip surface for installation,
install instructions, 2 microfibre cloths, 2 dust removal stickers, 2 wet wipes.
Start by placing the rubber mat on your preparation surface
and then put your phone on top of that. Take the wet wipe and clean the phone
screen throughly getting rid of any dirty marks from the surface.
With the microfibre cloth, dry the surface of the phone
ensuring that the screen is probably the cleanest it’s been for ages.
With the dust removal stickers, remove any dust that may have landed on the screen
in between cleaning procedures, if you don’t remove any dust particles at this
point it may leave bubbles on the surface when you put the screen protector down.
Put the frame over the phone, and press firmly in place.
Unpeel the screen protector from its backing, being careful not to touch the newly exposed
surface, the fingerprints you can see on there are from the top surface which can be cleaned later.
It’s easy to spot the top of the screen protector as there is a groove
to accommodate the iPhones speaker at the top. Make any final checks for dust and then place the
top edge of the screen protector inside the frame at the top of the phone and lower into place.
Glide fingers down the screen applying even pressure to the screen protector,
as you can see the sensitivity display is unaffected by this addition.
With the microfibre cloth, wipe across the
screen to remove any bubbles on the screen pushing them out to the side.
I’ve still got a few bubbles on the screen which I’ll push out afterwards.
A job well done, in certain orientations, it doesn’t even
look like there is anything on the screen. There is adequate room provided by the screen
protector for the iPhone’s on screen speaker and even placement of screen protector on
the phones surface provided by that frame mean that you still get that smooth and clean look.
Just remember when you are using the screen protector with cases,
the surface (which is the screen protector) will now be closer to those case edges.
Now that’s all done, your iPhone screen should be fully protected against scratches, smudges
and most importantly direct forces to the screen upto that 110 lb threshold,
while maintaining and not affecting the delicate balance of what this screen and the
technologies within the screen can do like face ID, touch responsiveness and display properties.
I’d like to thank ESR for providing this screen protector for me to review, it’s much appreciated
and there is the discount for you to enjoy if you’re looking to get yourself some accessories
to protect and customise your iPhone. If you enjoyed this video, please like and
subscribe to the channel, and press the bell icon to get notified every time I release a new video,
that’s all from me today, I’ll see you on the next one. Bye!