okay so if you want to connect your cable to your DSTV decoder this how it
have to be done so you connect your signal cable so for the signal cable if
you want to know how to how to connect the pin
how to fix in on your signal cable before connecting it to the back of your
decoder is all you are going to do it's like this when you remove the cover the
first layer or the cable
I'm going to remove the first layer
so you move the Festa
and then you remove the inside roba
very neatly like this then you fix your pee
and after fixing it need to cut it a bit because it's too long I know why
you said yeah yeah this you cannot light it up so you need to cut it a bit okay
and for you to make sure that you open will remove within this you need to tape
it up so I'm going to tip your cable
okay so to start inside York you go at the back of your DSTV Dakota how to
insert a signal cable from the LMB or from your dish yes we are going to use
it
LM B then you tighten it up light it up so hot and then we connect your admi
cube admi cable high-definition Multimedia Interface
for quality pitches by using a flat screen we need to connect your HDMI for
quality pictures so you connect you admi that's it yeah
if in case you are using an old television oh you're asking I will fill
up with your it if you are using an old flat screen television or any port TV
set we does not have a DM iPod then you insert your you use your AV AV cable so
you said to AV cables out to be here
then you connect it to your TV set so whenever you use this if you are not
going to use the HTML and you can't use both in case you want to transfer the
video to another TV set or another for our screen you can use voice to transfer
the video and then love with your adapter attributes or without after
cable you connect it here
then you are done so if I subscribe make sure that you subscribe and then he
didn't ask a single line you miss out on any video all right
you