Kokuyo’s Bobbin System is a cute and innovative way for scrapbookers, journalers, and planner lovers to organize and share their washi tape collection.
Inspired by sewing machine bobbins (the parts that hold thread), this system lets you create your own washi tape "bobbins."
Keep watching to see how it works!
In the Bobbin Roll Maker, you can fit washi tape with an inner diameter of 18 - 40 mm, an outer diameter of up to 50 mm, and a tape width of up to 15 mm,
like the tapes shown here.
To use the Bobbin Roll Maker, first push the release button down to open it up.
Next, stick an empty bobbin into its designated spot. Make sure to put it in with the six holes facing up.
Then, put in your washi tape of choice and close the maker.
The bobbin should sit flush against the maker.
Pull the washi tape and stick it to the bobbin.
Now you can start winding!
Once you are satisfied with the amount of tape on the bobbin, you can cut it and remove it from the roll maker.
Don't go too crazy though! You can't wind the maker backwards so if you roll too much, you'll have to unwind it manually.
To insert a smaller washi tape, remove the outer piece as shown and repeat the same steps as before.
If the washi tape starts to roll unevenly, pinch the maker together where the logo is and it will roll more evenly.
If you have two more bobbins, you can connect the pieces to keep them together.
Even if you stack a bunch together, they’re still extremely portable.
This Case with Cutter is a great way to store your newly created single bobbin.
Because it encloses the tape completely, you don’t have to worry about it getting dirty. Plus, it makes it easy to cut a piece of tape whenever you need one!
To open the case, press the release buttons on both sides.
Before installing the bobbin, pull off a decent length of tape.
Install the bobbin with the 6-hole side down. Don’t worry though—if you try to install it the wrong way, it won’t fit correctly.
Make sure to pull the tape through the rollers.
Close the case. It’s ready to be used!
Simply twist the bottom ridged piece clockwise to extend the tape and pull it against the serrated cutter to cut it.
The non-sticky side is the side that gets cut, so you don’t have to worry about the blade getting gunked up.
Make sure not to over extend the tape! If you wind it counterclockwise, it will simply close the case. You will have to rewind it manually.
The Petite Cutter is great for washi tape lovers who want a cutter for each tape.
Like the individual bobbins, they’re also stackable and portable.
To install the bobbin, take apart the cutter and insert the bobbin.
Pull out the desired amount of tape, then cut it against the serrated edge.
After each cut, push the section underneath to lift the tape up.
This makes it much easier to grab the tape.
The Bobbin system also offers tapes in singles or themed packs of three.
We love the charming, whimsical feel of the tapes.
The small size makes it easy to store in a pen case or pouch.
The clever bobbin design also prevents the edges of the tape from getting dirty.
We hope you’ve enjoyed this in-depth guide to the Kokuyo Bobbin System! Now you can mix and match the washi tapes you carry around and even swap with friends.
Thanks for watching and see you next time.