hey guys welcome to ERSBIT in this video we are replacing the back glass of the iphone 11
replacing the back glass on the iphone is very difficult if you do not have the proper tools and
if you're doing it by hand to do this repair you need gloves you need a protective glass and you
need a heat gun you also need some sharp tools and flat metal tools use a metal tool to remove some
of the glass at the center of the phone removing the broken glass at the center of the phone is
very easy and that's the easiest part on this repair the hardest part is to remove the broken
glass that are attached to the frame of the device in the center of the phone it is not attached to
the frame but it is just attached to the wireless pad and a protective film you need to work your
way from the center of the device out this is a very doable repair but it requires a lot of time
concentration and protective equipment also the way i have positioned the heat gun make my hands
feel really hot so if you're trying this at home keep in mind that this is not easy and it's going
to be difficult in most repair shops where they are doing the back glass replacement only they do
have some machine that can remove the glue on the back of the back glass and it's not going to take
much time and fix the phone completely but if you're doing this by hand it is going to require
a lot of times it is cheaper to replace only the back glass but you have to do the work i was using
the heat gun to hit the back of the device and at some moment i turn off the heat gun so the phone
can cool off and avoid any other damage that can happen to the phone while removing the back glass
from experience removing the glass around the center and going out is easier than removing all
the glass that are stuck on the edge of the device to do this repair by hand like i'm doing it you
must have a heat gun if not you're not going to remove much of the glass on the back of the device
also if your screen is in a good shape you need to be very careful while removing the
broken pieces of glass on the back of the device because you risk to scratch your front screen
since this screen is already broken and i'm going to replace it in another video i did
not pay much attention to the screen while removing the back of the device
also one other risk of damage while doing this repair is the cameras you can overheat the sensor
on the back of the cameras that's possible and also you risk to leave scratches on the
lengths of the cameras so the piece of glass around the cameras are harder to remove because
they are really stuck and you need to break them into pieces so that you can remove small piece
by piece so while breaking the piece of glass around the camera you might damage the ring or
remove the ring on the lens of the cameras or you can even damage the lens on the camera itself so
you need to be very careful while doing this part and again you need some heat in order to remove
the glass on the back of the cameras please do not overdo it because you risk to damage the sensor on
the cameras and the way apple has implemented their softwares now if you break the cameras
you're going to have a real pain in recovering the camera functionality so to remove the smaller
pieces of glass you need a sharp blade that will help you to remove the piece of glass around the
cameras where you do not have enough space work your way around the cameras like i did here
you should be able to remove all the broken pieces of glass around the cameras we're going to attack
the broken glass on the edge of the device to remove the broken glass on the edge of the device
is not really difficult since you've removed most of the glass already but the risk here is
to cut the edge of the device it is made out of plastic so there is a risk to cut the edge of the
device and it's not going to look pretty like it was you can do this repair at home but i do
not recommend this way of removing or replacing the back glass of the iphone and if you're not
really willing to do it you might start and stop in the middle of it and you've had enough of it
so while removing the broken pieces of glass around the cameras i removed one of the ring
on top of the cameras and you need to find a way to reinstall that ring when you're ready to
install the new back glass after you've removed all the pieces of glass
you will need to find a way to remove the piece of glue that are stuck on the frame of the device
so here i used a small piece of nail grinders to remove the excess glue that are still stuck on the
frame of the device once you've removed everything on the back of the device and the frame is clear
you can start to install the back glass and see if it is leveled here i'm removing the
small mic cover that was on the old back glass and you need to install that into your new back glass
after you install that you can check again to see if everything is leveled and if it is ready
to add the glue and seal the back glass before we seal the back glass you need to test the wireless
charging to make sure that you did not damage the wireless charging circuit the supplier for the
back glass provided a glue that you need to attach i would have preferred a back glass that come with
glue pre-attached because it is difficult to align this small piece of tape with the back glass
you might have to try multiple times before you find the right alignment for the piece of tape
once you've aligned the back glass with the tape it is time to remove the protective film
and install your new back glass once everything has been aligned press your back glass against
the frame of the device so that the back glass will stick firmly to the frame of the device
this is one method of doing it but i think the piece of tape that the supplier provided
is not good enough and it is not strong enough so i'm going to use a b7000 a liquid glue
similar to the same liquid glue that apple used on the back of their device using a b7000 will firmly
seal the back of the device using this small piece of tape that i used earlier it is not
going to last long when you finish adding the glue on the back of the device you can safely
insert the new back glass and use some clamps to apply pressure on the back of the device make sure
that you do not put too much pressure because you risk to damage the screen of the device
at the end we need to test our cameras to make sure that it is still working
and we have not scratched the lens on the cameras thank you guys for watching
subscribe like and share and i will see you next time installing the back glass is not
really difficult you need to align the back glass with the frame of the device and just install it