Friends, a big hello to everyone Today we’ll work with the rest of the foam plastic, I’ve got such
fragments with them today and we’ll work with them So you all Have a nice viewing let’s go
make a homogeneous mass so that it is homogeneous here that you can see that there is still a
solvent, and you can still add I think it’s just this whole bunch is going on, it
turned out to be such a homogeneous substance, just like plastic, it turned out to be an excellent glue, but it’s also
possible to use it for several purposes now, just for the sake of experiment, we’ll try
to glue two strips of MDF together with you 2 pieces of MDF plywood, we’ll take it straight So, I
’ll leave it to dry Well and we also apply it on the plywood itself,
it can even be a little thick,
and this is how we glue two plywood together
, there are cases when there is a hole left past the crate and the self-tapping screw will not hold there
and the hole will flow on the roof, for this we need to take a
gasket from the self-tapping screw here such a rubberized one and take a rivet. This is how we insert
everything. As we see, we have holes it won’t be good, it’s
easy to solve it, but if there’s something like that, someone missed something, hit there’s a
hole how to seal it so that it doesn’t leak,
our today’s solution will come in handy, put on gloves, this place is a little we
clean it and be sure to degrease
it, we take our solution, I have such a big brush with a brush, we apply
the first layer well, we take the most ordinary bandage, we will just
have several layers as reinforcement, you can leave one layer, now let's leave it to dry and see in
24 hours. I tried to make one more solution, but I only made acetone
and a little thicker also diluted with acetone and now we’ll just try to
seal our hole and leave it to dry and tomorrow we’ll see
friends a little less than 12 hours have passed I didn’t keep 24 hours Let's
try how now our glue stuck together Well, look really good paper
As for plywood, you can’t tear it at all, I
also tried to apply it just on a piece of plywood, the composition itself was covered with such a film
that is not afraid of moisture, nothing even like this, you can puff something, everything will roll down
and is so stable with
regards to of our metal, too, everything froze, too, everything froze,
I liked this option more, it can be done Carefully Of course, you can take the paint
And you can practically clean it up like this. I’m just an option
.
direct effective
friends so that the remedy is always effective m you can cook it, you can also glue it, apply it on wooden surfaces, on concrete
surfaces, on the floor. Well, what a fantasy is good for friends. I hope the video was useful to someone who might
come in handy, someone liked it
. method
thank you so much for watching me for supporting those who have not subscribed Be sure to subscribe
to you I wish you all good good health, well, all the best See you again bye bye