Friends to all, a huge hello today we will make a homemade product with such a
copper tube, it is very soft for this, therefore I chose it. what will happen, let's
see in the video of course such things are already on YouTube, but nevertheless we will do it in our own
performance. all pleasant viewing let's go. first of all, I tightened the pipe in a vise, it
's 32 now let's try to make one curl, do it neatly, it
turns out this is the kind of thing we 'll cut off the
extra ones now. it turned out roughly the same, plus or minus will not play a role. now I
take a screwdriver inserted a drill bit and now we will drill a hole in the center.
it turned out such a hole now I need such a jar here a
metal lid, take our spiral, mark where we will have holes in the center,
now we will make two holes for 8. so I cleaned it from both sides
all this must be degreased and inserted into the lid like this way.
we take cold welding and begin to knead it all, kneaded it to a homogeneous mass, some kind of old
or defective, incomprehensibly too tough, we will now close up the hole in a circle,
in general, on both sides, I sealed it up with cold welding, it
can be a little messy, well, the main thing is not to let it through , leave it all to dry.
from a simple bandage I made such not uncomplicated wicks and wicks
this is for us so that there is a supply and now I roughly made it to the fold so that it does not burn
further does not heat up does not burn in a general form all this will need to be set the
best, this is how
now we take alcohol 90 percent now I will show if anyone is interested in buying at the pharmacy called
asiptallin, this is also alcohol just added to chemistry, because not for external use
it will be 90 percent enough for us, we take a jar, pour alcohol in there and put ours in the
wicks and close the whole thing now we are getting wet to put a little -a little bit we also need a
lid, but this one from the same jar into a metal one for us in order to ignite the
fact also a card now a lid a little alcohol the whole thing the first time I don’t even know it will
not work well, let's try and put it now here so we dripped alcohol we set it on fire
with lit now we are waiting until it comes out often you need a championship temperature so the characteristic sound of go
already appears the reel goes out and already saw even the flame now we will remove this which is playing
here
it is burning cool right
now we will try to extinguish we take a regular stick
and extinguished now we will try to ignite everything right back up the class
so I took a scrap from the pile and put it down, got some water we can try from us to heat it
burns of course notably there the flame is very good. I'll put it on the accelerated one and we'll see
friends the water as we see it boiled, the temperature is probably enough, let's try to remove our
burner and it burns, I think it turned out cool for a quick hand, and there is still a whole bunch of alcohol
burning and burning here, we make a cool alcohol burner done in five minutes ...
everyone who liked this video can put a thumbs up to those who did not like
you-know-what, who did not subscribe be sure to subscribe, well, see you next time!