Welcome to the HellermannTyton ACADEMY, the workshop for real professionals.
Today I show you the wonderful printer TT430.
This printer is perfect for small and middle volume and if you don't change material so often.
Step 1: Installation
Step 1 - Installation
Please install the driver for the printer on your computer.
Please install the software TagPrint Pro 3.0.
Then we connect the power source with the printer.
Afterwards the USB wire from the printer to the USB connection on your computer.
Step 2: Loading the material
Step 2 - Installation of the material.
Please open the margin stop, ...
... put your material inside beneath the black arm.
Then we close close the margin stop - it's so easy.
Please be careful that the material is under the black sensor.
Then we turn the knob to guide the material.
If you switch on your printer you will directly see a yellow light under your printhead.
This yellow lamp is the sensor.
The sensor can make two things.
He knows, if there is material is inside or he is able to find the gaps between the labels.
For 90 percent of the materials the position in the middle is perfect …
... but there are also possibilities to use materials like this with a small gap ...
… or here the small gap on the side or the sensor holes here on the side.
Then we have to move the sensor like this.
Push the button one time, ...
... turn it to the left, then you can move the sensor to the right position.
You close it - that's it.
Or back ...
... in the middle.
That's it.
Step 3: Insert the ribbon
I give you a small hint.
If you want to remember later - in one year, in two years - how to insert the ribbon ...
... always remember position 99.
99 means number 9 like this on the first role holder.
Thean under the grey print head holder and take it a little bit outside of the printer like this.
Fix the ribbon with a small piece of tape on the role, …
... turn it, stretch it, hold it and take it on the second arm.
You turn a little bit and the ribbon is inside.
Please close the print head with two fingers and turn the knob.
Now you can see really clearly position 99.
If you want to check if everything is ok get a piece of tape, …
… put ot on the ribbon take it of and you can see the black colour has been take off.
Then everything is perfect.
At last we close the cover.
The printer is now ready to print.
If you want to use a cutter or perforator with the TT430 ...
... we have to remove the tear off edge like this.
Then put the cutter inside and close it.
If you like our TT430 as much as I do please give us a "like".
See you soon, next time at the Hellermanntyton ACADEMY, the workshop for real professionals.