Good day! The FA's rule on Operations of Small Unmanned Aircraft Systems Over People for Part 107
flights states you can fly over people as long as your flight meets the requirements of one of four
categories. Category one is the most flexible. The only requirements for category one flights over
people (in addition to remote ID) are your small unmanned aircraft or drone must weigh 0.55 pounds
or less which is the equivalent of less than 250 grams. This weight does include everything on
board at time of launch like your battery and any external cameras. Also your quad must not contain
any exposed rotating parts that would lacerate human skin on impact. In other words, your props
need to be protected in prop guards, ducts or something similar. I took these requirements as
a challenge to see if I could build my own three-inch cinewhoop that weighs less than
250 grams with prop guards, battery, and external GoPro camera, and I'm going to 3D print it! That's
right. Today, we're going to turn this 3D filament into this 3D printed three inch cinewhoop!
Fly fearlessly and clear skies friend!