Suppose we take our circuit of a battery and a light bulb,
and we make it slightly more complicated by adding a switch.
When the switch opens, the charged particles are prevented from passing through.
Particles with the same charge repel one another,
and they therefore spread out throughout the wire.
The events shown here all happen at the same time, and this is the result.
For the light bulb to turn on, the switch must close, so as to create
a complete path for the charged particles to flow around the loop.
If we have several light bulbs, each light bulb can have its own individual switch.
Or, we can have one switch which controls all the light bulbs.
The number of charged particles that pass by each second
is what we refer to as the current.
The charged particles flow through the light bulb because
the battery causes them to have a higher potential energy
on one side of the light bulb than the other.
This potential energy is what we refer to as voltage.
If both sides of a light bulb are at the same voltage,
then no current will pass through it.
As the voltage across the light bulb increases,
the amount of current through the light bulb also increases,
and the light bulb produces more light.
When a switch closes, it causes the two different parts
of a circuit that it connects to be at the same voltage.
If both sides of a light bulb are at the same voltage,
then no current will pass through it.
And if no current passes through a light bulb,
then this means that both sides of the bulb are at the same voltage.
A properly working battery ensures that the difference
in voltage across it is always at a specific value.
All points that are directly connected to each other through
metal conductors and closed switches are at the same voltage.
This means that if we have several light bulbs connected
to a battery in parallel, the voltage across each light bulb
is equal to the voltage that is produced by the battery.
Since the voltage across the light bulb determines how much
current passes through it, each of these light bulbs will have
the same current pass through it as we had when we just had
one light bulb connected to the battery.
The total current drawn from the battery is the sum
of all the currents drawn by each of the light bulbs.
Now, let us consider a situation where we have
several light bulbs connected in series.
Since the total voltage across the group of light bulbs is at
the specific value set by the battery, the drop in voltage
across each light bulb is only a fraction of this.
Since the current that passes through each light bulb
depends on the voltage across it,
this smaller voltage across each of the light bulbs means
that a smaller current will flow through them.
This means that the lights will not be as bright.
Because the light bulbs are connected in series,
this means that the current passing through each of them is the same.
The amount of current entering always has to
be equal to the amount of current exiting.
This is what we refer to as Kirchhoff's Current Law.
This is accompanied by another law, called Kirchhoff's Voltage Law,
which states that as we travel around a loop,
the amount of voltage increases that we experience
must be exactly equal to the amount of
voltage drops that we experience.
The use of these two laws together allows to analyze all electric circuits,
no matter how complex they become.
Much more detailed information about
voltage, current, and electric circuits
is available in the other videos on this channel.