[Captions by Y Translator] In this video,
we're unboxing our very first King of Random kit.
Everything you need to build a fully functional laser blowgun
all in one box.
[Music]
Guys, the first-ever King of Random DIY kit is here,
and we are about to show it off to you what's inside,
how to build it,
and some fun things to do with it.
I love this caution tape.
Everything.
Like, I'm super happy
with like just with how the whole kit looks,
and I didn't design this.
I'm not bragging that I design something nice.
This is nicer than something I would have designed.
Custom printing on the box,
got this fun King of Random caution tape.
It's pretty box.
I'm gonna break it.
[Music]
Give me that. Thank you.
Much prettier.
[Music]
1, 2, 3.
That's really cool.
Look at this.
It comes with stickers?
Comes with stickers?
It comes with a glue gun.
Oh, wow. That's like actually legit.
Okay. This is my favorite.
It's instruction manual with our target.
Seems simple enough.
There we go.
A little postcard, from The King of Random.
Little zip ties, pre-cut PVC, that is useful.
We've got three different pieces here.
I think one is going to be joining them together,
one's a mouthpiece,
and one is to hold the laser sight,
and it does come with a laser.
So we literally just send everything you
could possibly need in the kit.
There are two,
well sort of three things not included.
One is electricity to run the glue gun.
We do not provide that.
You must provide your own electricity.
But we do include glue sticks.
There are some small screws,
and we do not provide a screwdriver,
but these are pretty nice.
They have the kind of head
so you can use either a Phillips screwdriver,
or a flat head screwdriver,
or if you don't have either of those,
you can just use a kitchen knife,
like that'll work fine too.
So we don't include one,
but everyone can find something that will work as a screwdriver
for these screws.
All right, lots of little paper tabs,
and the paper cone.
A whole roll of electric tape.
Also included,
two sets of stickers you can use as decoration.
You don't have to use these, but you can.
Dibs some pink one.
We also do not provide pair of scissors.
You are going to need those.
So electricity, screwdriver, pair of scissors.
That's the only things we do not provide
for this project in the box.
It's pretty complete.
We've got all our stuff.
It's a lot of stuff.
Let's try building it.
First, let's plug in one of the glue guns.
Get that warming up.
Nate's become a kitty cat.
All right.
Now, one of the first things we're actually going to do is
if you want to use these camo stickers,
you want to apply those
before you start assembling everything.
So, like I said, I'm claiming the pink one.
Sticker is just
like it's custom-made to be just the right size fit nicely
around the PVC pipes that are included.
So all I'm just going to do is line it up nice and straight,
and then roll it on.
[Music]
All right. So next step is you've got this mid sized piece here,
cut PVC.
That's going to be your coupler.
It's going to hold these two pieces together.
These stickers have
like a little King of Random logo in one spot,
and that's a...
I mean I prefer to have that down near the mouthpiece.
So don't put the coupler on there.
Make sure it goes on the other end.
This also comes with some electrical tape.
This is largely decorative.
We don't really use this as a structural element,
but I'm going to use that to cover this coupler.
So it doesn't just look like a piece of PVC.
So here's the thing guys, we provide you with tape,
we provide you with decorative stickers,
awesome things,
but feel free to customize this however you want.
That's the whole point.
Now that our pipes are coupled together,
let's add a mouthpiece.
That's what the shortest one is going to be.
That's going to go on the end with the King of Random logo.
At least, that's how I'm doing it.
Do it yourself.
You want on the other end, that's fine.
If you don't even want to use this sticker,
and you want to decorate with other stuff,
that's fine too.
Multi-purpose weapons.
All right, as this coming along, now I'm going to attach,
these little foam things,
and they're partially cut through,
so I'm just gonna break through the rest away,
fit them over,
and then another layer of electrical tape.
So these are for holding your darts in place
so you always have your ammo close at hand.
So here, we're adding another layer of electrical tape,
and that's simply just to hold the foam in place.
All right, next up.
We've got a couple of different ways
that we can mount our laser onto our blowgun here.
If you want, you can take these zip ties,
and zip-tie your laser directly to the body of the blowgun.
Now that is one way to mount the laser on,
but it's not the best way.
We included it as an option
so that you can do it if you prefer.
However, I've got a method that I like more,
and it's what we've got the pieces for.
So the other way of mounting your laser is to actually
use the eight screws that are included,
drive them into this piece of PVC that's been pre-cut for you,
and secure your laser inside for precision pointing.
[Music]
I made a pet.
[Music]
So now we've got the screws driven
into our little pieces of PVC,
let's fit the laser pointer down inside,
and tighten up the screws just a little bit.
We're still going to do like calibration of the laser later,
but we can start.
We don't really need the key chain attachment.
That just pops right off.
Our lasers now mounting this little housing,
and we're going to glue this onto the blowgun.
It's kind of up to you where you want it.
It should be high enough
that it clears the coupling right in the middle.
So even if you wanted on the back side,
it's going to work.
I think for me,
I'm just going to put it right in front of the coupling.
I don't have a reach that's quite as long as Nate,
so I'm going to go ahead, and put my laser pointer right
behind the coupling.
So it's a little bit closer to the mouth guard.
You want to make sure not to get the glue on your screws
if you ever want to adjust the site on your laser.
So as I said before, lots of different ways
that you can customize your own blowgun.
We're going to go with spray paint.
[Music]
Beautiful blue laser sight.
Customization is highly encouraged.
Now, we're going to start making some darts.
We've got our blowguns.
We've got the lasers attached to them.
Now, we need a piece of paper,
comes lots of these little squares of paper.
It's got this set of 12 clear stickers.
It's really hard to tell with these are
because they're clear.
But this is 12 small round stickers,
and a small nail.
Be aware that making these darts
with the nails does make them very dangerous.
You should not ever shoot there anything that can be damaged,
or is alive,
or can feel pain, just a bad idea.
Use at your own risk, and be very careful.
So this is pretty cool.
These little paper cups are just here
to get exactly the right size
and shape of form that you want for your little paper cones.
What we're going to do is take one
of our clear circle stickers.
That's going to be our tape.
So we just wrap one of our,
one of these square pieces of paper.
We just wrap it around the cone,
leave a very small hole at the top,
and then just use a sticker to seal it.
Now, if you want to reinforce this, you can.
You should still have like an entire roll of electrical tape.
You can wrap that around,
and you're going to have a little bit
more sturdy of a cone.
It's going to hold up longer.
It's going to be waterproof,
if you do a really good job of covering it in tape.
But for now,
we are just going to keep using that one sticker to show
how it works.
Once we've got the little cone made,
obviously, it's not even all the way around,
we need to grab a nail,
and go back to our glue gun.
So what we're going to do is we're going to take our nail,
and you're going to drop it into your cone,
and that little hole that you've left at the bottom,
let it fall through.
And you're going to hold it up a little ways so
the nail hasn't completely dropped through.
This way,
you can drop a little bit of hot glue right
around the top of that nail.
And then, pull it the rest of the way down.
[Music]
We're going to take our dart, fit into the end of the gun,
and just twist.
And this should leave a mark on the paper
that will show us where we need to trim it.
Because obviously, we have too much paper right now.
[Music]
At this point,
we should have functional blowguns
with functional blow darts.
And I think going to do is zero in our sight,
so it's a little more accurate.
[Music]
To get our laser sight it in just right,
we've got the blowgun in a vice,
and we just want to make sure that it's nice and level.
So right now,
it's being held very gently in the vice.
Once I get it level right there,
look how he's going to tighten it a little bit.
Now, what we're going to do is we're going to take one of the darts.
We're going to fire it as hard as we can at the target,
and then we're going to twist the screws,
moving them around until the laser lines up right
with where the dart hits.
So we can see our laser dot does not line up very well,
but that's why we have adjustable.
We need to adjust the laser
until that dot is right where the dart hit the target.
So adjusting your laser and making sure
that you're citing is accurate isn't really that difficult.
All you've got to do is loosen
or tighten the screws that are holding it in place,
and you should be able to get it even.
[Music]
Bullseye.
[Music]
The kit does come with a target,
and I've used some of the tape and tape it to the box,
so you do have a target that's already included.
You can use this.
You don't have to be using a dartboard.
Let's a...
Let's try shooting this bad boy.
[Music]
I think I just stabbed another dart,
like perfectly nested.
You shot one dart through another dart,
Robin Hood style.
That one just shot right through that one.
If you want a slightly less dangerous version of projectile,
you can use a bamboo skewer, instead of the provided nails.
And if you're really worried about it,
you can even sand down the tip, so it's not quite so pointy.
[Music]
So obviously, the bamboo is not nearly...
Less piercing power.
Less lethal.
Barely, barely stuck into the cardboard.
Wanna go for a moving target.
Do you want me to throw it?
Yes.
This is a terrible idea.
Ready?
Pull.
I hit it.
Did you really?
Oh my God. He hit it.
It wasn't a good hit, but I hit it.
Yeah, it's kind of way too windy,
and dangerous for that.
So we're not going to do that anymore,
but I did get one hit.
[Music]
I think it went through it.
Oh, no!
I went right through it.
The kit is here, and it is awesome.
Don't forget that you can download your own digital target
at TheKingofRandom.com.
It's also fun to experiment with different types of ammunition.
I'm pretty sure you could get some marshmallows
to work in this beautifully.
So then you can have like a laser assisted marshmallow gun.
Guys, to get your own kit now,
click the link in the description.
Guys, that's it for today, but the fun doesn't end here.
This box at the top will take you to our latest video.
And that box down to the bottom will show you
what YouTube thinks you should be watching next.
And if you're not subscribed, hit that bomb in the middle.
That will get you subscribe to the channel,
so you never miss out on the fun.
Don't forget to ring that bell,
and we'll see you in the next one.
Talk to you then.