hi, today i perform installation MERCUSYS wireless router
You use a LAN cable connected between computer and MERCUSYS router
as described above
The setup steps are as above
step 1: login
Open a web browser
Enter the Mercusys ip address
192.168.1.1
The login page will appear
You can log in with mwlogin.net address
You are required to set a new password for the first time you login
For example, I set the login password to 123456
Enter the same 2 times
->
wait a minute
Click "Skip" to go to the detailed settings page
X
successful login, this is the detailed settings page
Step 2: Internet settings
Advanced
Network >> WAN Settings
Connection Type: Dynamic IP
There are 3 ways to connect to the Internet
Usually we setup in Dynamic IP mode
Click "Save" to save the settings
step 3: setup wifi network name and wifi password
Mercusys has 2 wifi networks: 2.4G and 5G
I setup the wifi network name and wifi password settings for the 2.4G network first
2.4GHz Wireless
Host Network: ON
Setup 2.4G wifi network in Network Name (SSID)
eg: MERCUSYS 2.4G
Set 2.4G wifi network password in the Password box
for example 123456789
Click "Save" to save the settings
OK
Next is the set network name and password for the wifi network 5G
5GHz Wireless
Host Network: ON
Set 5G wifi network name in Network Name (SSID)
MERCUSYS_5G example
set wifi password for 5G network in "Password" box
for example 123456789
Click "Save" to save the settings
The setup steps are complete
You use a LAN cable connecting MERCUSYS to the Internet modem
as shown above
all stages are finished
Now try connecting to the Mercusys wireless router and see the results
Here are 2 wifi network names of MERCUSYS router
2.4G network name and 5G network name
Connect
correctly enter the wifi password
next
Yes
Connected
successful connection
review the steps setup
Thank you for watching the video
If you feel good, don't forget to Like and Subscribe