This video will guide you through the setup of the DJI FPV Combo and the DJI Motion Controller before your first flight
Before flying DJI FPV
you will need to complete the following preparations
Unboxing
Open and unpack the boxes of the DJI FPV Combo and DJI Motion Controller
Take out the drone and goggles at the top of the box
Then take out the remote controller underneath
Take out the accessories in the box
Remove the gimbal protector
and then remove the protective adhesive from the gimbal
Mount the four antennas to the corresponding positions on the goggles
Connect the AC power adapter with the AC power cable
Take out the DJI Motion Controller
Visit the download page on DJI’s official website
Scan the QR code on the page using your mobile device
download the DJI Fly app
and log in or register a DJI account
Press the power button once to check the battery level of each component
Use the AC power adapter in the box to charge the flight battery of the DJI FPV drone
The DJI FPV Goggles Battery
DJI FPV Remote Controller
and DJI Motion Controller can be charged with a USB-C cable connected with the AC power adapter
Below is the charging time for each component
Motion Controller: Approx. 2.5 hours
Remote Controller 2: Approx. 2.5 hours
Intelligent Flight Battery: Approx. 50 mins
Goggles V2 Battery: Approx. 2.5 hours
Insert the flight battery into the drone
Press the power button once and then hold to power on the drone
Use the power cable to connect the goggles with the goggles battery
Press the power button once and then hold to power on the goggles
Press the power button once and then hold to power on the DJI FPV Remote Controller 2 or DJI Motion Controller
Linking
Linking refers to the establishment of a wireless connection between different components
if the following circumstances occur
you may need to link the components again
The rear aircraft status indicators of the drone are quickly flashing yellow
The battery level LEDs of the remote controller or motion controller are quickly flashing at the same time
After powering on all components
link the drone with the goggles first
Press the red linking button of the goggles using a small
thin object such as a paperclip
Press and hold the power button of the drone
When linking is successful
the goggles will stop beeping
and the drone’s aircraft status indicators will stop flashing in sequence
Next
link the drone with the remote controller or motion controller
Press and hold the power button of the remote controller or motion controller
Press and hold the power button of the drone
When linking is successful
the remote controller or motion controller will stop beeping
and the drone’s aircraft status indicators will stop flashing in sequence
Connect the USB-C OTG cable to the USB-C port of the goggles
Connect the goggles to a mobile device using the USB-C data cable
Launch the DJI Fly app on your mobile device
If this is your first time using DJI FPV
you will receive an activation prompt in the DJI Fly app
Please follow instructions to complete activation
After activating DJI FPV
update the firmware of each component to the latest version
and a prompt “New firmware available” will appear in the upper left corner
Follow instructions to download the firmware and wait for the update to complete
4. You can also use DJI Assistant 2 (FPV Series) on a computer to update the firmware of each component separately
Switching Controllers
Follow the steps below if you want to switch controllers after linking
Power off the DJI FPV Remote Controller 2
Power on the DJI Motion Controller
Link the DJI FPV Drone with the DJI Motion Controller
If it is your first time using the DJI Motion Controller
activation is required before linking it with the drone
After linking
connect the goggles with your mobile device and use the DJI Fly app to activate the DJI Motion Controller and update the firmware
You are now ready for your first flight with DJI FPV
Thank you for watching