Hello everybody 'Lurgs' here welcome to my channel and today
how to change the filter on your LAY-Z-SPA, right let's get cracking, well in a minute!
And this is England yesterday was a beautiful day and today it's wet and cold so I will not
be needing this, and today I'll be replacing the filter with a brand new filter but if you want
to try and clean the old filter there's a link above now about how to do that.
And I'm in the LAY-Z-SPA here and generally what will happen is when the filter gets blocked up
you will get this E02 error and that means you've got dirt on your filter and the water
is not flowing through at the correct flow rate and the filter is inside this housing here
now before we do anything before we remove all that it's very important that you turn
the LAY-Z-SPA off at the mains and make sure you definitely do this with dry hands obviously once
the power is turned off we go back outside and the power is definitely off this is what the brand
new filter looks like this is the one that we're going to be installing remove the filter housing
by gently turning it anti-clockwise this is the whole unit, and there's a link above now about
what to do if your washing machine is not draining water, and then remove it out of the LAY-Z-SPA
and the filter is actually inside here so put this on a table somewhere
let's just put it over here obviously you don't want to remove the filter inside the LAY-Z-SPA
otherwise you're going to fill up your Spa with lots of debris and dirt not a good idea
turn it over remove this locking nut here then the top just clips off
and there is the filter there and you can see how dirty it gets
doing its job well picking up lots of dirt, debris, bits of hair,
all sorts, spiders, flies which fall into the water put the new filter inside
push the lid down
flip it over put the locking screw nut back in tighten that up clockwise
now it's ready to go back on, and there's a link above now about what to do if your dishwasher is
not draining water, back into the LAY-Z-SPA and you're putting it on the attachment at the bottom
now this will go on very very easily if it feels like it's not going on don't try and force it
obviously you've got plastic threads you do not want to damage those threads so just turn
it clockwise and it should very easily just turn all the way around until it locks into position
there we go fabulous now let's go back inside and turn the mains back on again make sure you've
definitely got dry hands if not get someone else to do this then flick the switch on this
unit here and you've got the red light which comes on that means the power is now on for
the LAY-Z-SPA we're now back in the LAY-Z-SPA and the power is definitely on on the dashboard
hold the On\Off button in the middle until that goes green
just unlocking the keyboard by pressing the padlock button now
I'm going to turn the heating on turn it up to 38C
you can feel the hot water coming out already which comes out through the pipework here
now it's time for bubbles!
BUBBLES, and a lovely cup of tea, always have a lovely cup of tea if you're going
to be working on a how-to video, there's someone else who's desperate to get inside the LAY-Z-SPA
but they're not allowed! If you found that video useful please subscribe by pressing the button
down below there's some other useful videos around the edges of the screen here if you'd
like to select any of those that are useful to you that would be really cool thanks for
watching. Lurgs