Hi, guys. Kirk is here with Kirk giordano plastering, what I'm going do is we are going
to put some stucco over this patch here what a nice patch it is I did it myself always over do
my work that way there's no problem I'm gonna do this is it's too small to bring my mixer,
so I'm just pulling it out of the bucket here just kind of like know exactly is it going to
take me a long time to do the scratch coat as well as the ground coat because the material
I'm using is Portland cement however I got luminite in it Yemenite is an accelerator
and then if I put a top well I put too much I want even be able to use this but just made
Yeah, how do talking guys do this? It's going to dry roughly 15 minutes
before I put the next coat on. I don't advise folks to use luminite
unless you got some time is because you gotta know how much to put in.
Hey, one more scoop because I'm out of the mud it
okay I'm putting my second coat on and I'm using luminite which has accelerators this
way I can keep my costs down for the folks who hire this fellow originally just emailed me a
picture I looked at it give them a bit online and here we are but the Illumina allows me to
keep my prices down without luminite then I have to make three trips instead of two so anytime
I can make two I'll pass the savings on to you guys anyway this is my second coat yes already
this second coat with with this luminite is it's set in very fast just the way I want kind of like
again I use it just to avoid that second trip it has the same strength it doesn't compromise
the integrity of the stucco the ability to make one trip or two depending on inspections in this
way pass those savings on to you because I have to come to set up twice bring my big truck and
set up twice then I have to charge for itself load everything and once I float everything I'm
gonna come back and - it because this is a heavy - finish and so fellow who hired me said man has
got a problem can you see over here I gotta get your mug that height I told him that's
pretty easy put on my chart right here and just like that like that and then I'll trowel it down
and cleaning it up anyway that's how the pros do it I'll go ahead and pull out all this up and show
you the completion of it okay guys we're complete with this except for the - now the house is about
80 years old and it's had a heavy - finish when they originally did this they they dashed it like
this and through a lot of mud on it over the years they softened up that appearance with about maybe
10 coats of paint maybe 20 it doesn't really know hard to figure it out but anyway what I
did is a heavy flow finish and it's really close but it wasn't all the money so now I'm dashing it
and rather than cover this window I use another technique I hold my Hawker my trowel and I go
above it that's how it was due right here - like you're saying - assault and this way when they
paint it it's a little closer and again I don't want to cover this whole window so I've been doing
this a while so I get away with this kind of stuff I get a little bit on the frame and I'm gonna
take some leaf water anyway that's how we in the training actually finishes here my name is kirk
I'm with Kirk giordano plastering, thank you folks for watching, we'll see you on the next one.