(upbeat music)
- Hey, everyone. Nick Griot from Griot's Garage,
and today we're gonna take an in-depth look
at our Ceramic 3-in-1 Wax.
In product development, there are two primary paths we take.
Following Sir Henry Royce's quote,
we can take the best that exists and make it better.
In this case, we won't be the first to market,
but we'll have the opportunity to evaluate
successful products and develop a formula
that outperforms them all.
The other path is if it doesn't exist, create it.
In this case, the development cycle is much longer
due to the innovation required.
Our response to ceramic protection
has been calculated and deliberate.
In the past decade or so, professionally applied
ceramic coatings have become all the rage
among enthusiasts for their durability and gloss.
The challenge is, if not properly applied,
they can leave an inconsistent appearance
that is very difficult to rectify,
not to mention the personal safety equipment
required during application.
After over a year of development, we're proud to finally
introduce our Ceramic 3-in-1 Wax.
This formulation encompasses extreme protection,
is exceptionally easy to apply, and will assuredly
exceed your high expectations.
We're so pleased to offer an in-house,
scratch developed and manufactured formula,
which is easy to apply, provides intensely durable
water beading protection, and self-cleaning capabilities
that you'd expect from a product three times its price.
Ceramic 3-in-1 Wax offers unique benefits over
traditional natural or synthetic polymer-based formulas.
We blended unique, superhydrophobic polymers
with SiO2 and carnauba to deliver mind-blowing
water beading protection, durability,
and enhanced depth of color and clarity.
It forms a chemical bond with your paint
to impart a layer of protection that is more robust
than conventional waxes and sealants.
SiO2, or silicon dioxide, is the most common
active ingredient found in most ceramic products
on the market, and is decidedly not a gimmick.
Our product stands up to scrutiny and will
undoubtedly impress even the biggest of skeptics.
It is important to note that this is not comparable
to a professionally installed coating,
but it is great as a stand-alone protectant
or to preserve or boost and extend the life
of a professionally installed SiO2-based coating.
To be clear, we have tested this formula extensively
with many major professional applied coatings
and can attest to its compatibility.
For coating maintenance, this product benefits the surface
by enhancing gloss and slickness while restoring
beading characteristics which can diminish over time.
Making 3-in-1 Wax easy to use
was our number one priority.
A lot of ceramic products can be a little finicky
and can create problems if applied incorrectly.
Ceramic 3-in-1 Wax won't get you into any trouble.
If you've used a spray wax before,
you can use this product with great results.
To use, first make sure the car is perfectly clean.
Ensure the paint surface is free of above and below
surface defects by decontaminating the surface.
Should below surface defects like scratches, stains,
or swirls exist, it is best to correct the paint
using the appropriate polish.
Keep in mind, prepping the surface first will
provide the highest level of performance and durability.
Working in small sections, start by lightly misting
Ceramic 3-in-1 Wax onto the surface.
Using a clean microfiber towel, initially spread
the product evenly across the surface.
Immediately follow up with a dry towel
and buff off the excess.
It really is that easy.
As you work your way around the vehicle,
make sure to cycle through towels to make drying effective
and prevent any unwanted streaks.
In the rare case you notice an inconsistent appearance,
simply apply a light spritz of Ceramic 3-in-1 Wax
and buff dry.
Ceramic 3-in-1 Wax is safe for all exterior finishes,
including hard plastics, rubber trim, and wheels.
For maximum durability, allow Ceramic 3-in-1 Wax
to cure for 12 to 24 hours before being exposed to weather.
And if possible, an additional coat
will exaggerate the results and provide
even better protection and durability.
In our extensive testing, we found
another incredible application for this product.
It can be used as either a rinse aid or a drying aid.
For a rinse aid, following your post-wash rinse,
mist onto the surface and perform a final rinse.
Likewise, for a drying aid, apply a light mist
on the surface as you work your way around the vehicle
with one of our PFM drying towels.
Either approach boosts protection, surface slickness,
and makes your paint pop following a wash.
So there you have it.
Ceramic 3-in-1 Wax will make a believer out of you
with its awesome durability and easy-to-use nature,
and the results will speak for themselves.
We're proud of this product and can ensure you
that there's more to come.
Thank you for watching.
For more information on Ceramic 3-in-1 Wax,
be sure to visit griotsgarage.com.
And as always, have fun in your garage.
(upbeat music)