You're going to need two balloons.
First of all, we're going to make the wings.
So I'm going to make yellow wings here.
So inflate your balloon.
Inflate the
balloon almost all the way.
Starting with our nozzle end, we're going to tie the nozzle to the end here.
So let's do that.
We're going to make a loop.
Here's the loop.
Now what you want to do is find the opposite end the, the midpoint of the loop.
Now once you find that we're not actually going to use the midpoint we're going to move
and shift over just a little bit, maybe about that far.
Maybe about an inch off center.
You want to work from off center and you're going to twist this into here.
Let's do that.
You'll have a lopsided bow tie which is exactly what you want.
Now we're going to use the midpoints.
We're going to take this midpoint here and twist it into here.
Do the same with the other side's midpoint.
See?
The butterfly is forming.
Now make some adjustments.
Now let's get our second balloon and we will add it to our butterfly.
You've got your second balloon.
Now the inflation on this is not crucial.
As you can see I've left maybe about three or four inches, it doesn't really matter because
it's not crucial.
And you're only going to make a few twists.
So tie it off.
Now you start with a small basic twist here so let's do that now.
Get your butterfly wings and we're going to place this body onto the wings.
What you're doing is simply wrapping the second balloon around the first, the wings.
Get a nice tight fit up here and then twist it together.
Now of course, we have extra balloon here so let me show you how to take care of that.
What you're going to need are some scissors.
So first of all, you're going to try and make a basic twist to match this one here.
Got your matching basic twist here?
Now we're going to have to cut off the rest of the balloon.
So pinch,
take out your scissors and just cut
the uninflated end here.
Don't cut here because otherwise it'll pop.
You probably won't want that so just trim.
Remember, I'm pinching here so I don't let the air escape.
And now you tie this up.
Try and make the knot as close to the balloon, the inflated part of the balloon as possible.
And all you have to do is trim the rest off, make some adjustments
and there you have a two balloon
butterfly balloon animal.
Thank you.