[MUSIC]
So we actually got some
rain in California
last week for a change,
and so we got some mud and
water debris in our lines.
Okay.
All right, this is where air's gonna come through.
Let me see.
Actually I'm gonna pull this guy out, and
a little bit of dust in here.
That's what's cool about this bottom drain.
You take it apart if necessary for works.
So you don't have any dust in there.
I wanna make sure there's no debris inside there, so
when you go to turn on the air for the very first time.
It doesn't go up and clog your dome, cuz I don't know if you can notice
but there's a bunch of little lines in here and those are all holes.
And so this thing swells up when the air comes through there.
So all the air is gonna be coming up through this guy.
Now, when this guy comes.
This is the check valve so water doesn't flow back out of the pond.
I got that union tight.
This piece is loose.
And the reason is, this guy screws to this into this, like so.
But, if you'll notice, we have this massive gap underneath here.
So I can get my whole fist underneath there.
So what we really want.
We only want around three quarters of an inch, just a little bit.
So, I'm going to tighten this up.
Then we're gonna go ahead and
determine how many inches we have here.
Okay, I have about a two and three quarter inch gap.
Two and a half inch gap.
So, now I have this resting down on here about where
it's going to glue into the spot.
So.
Two and a half inch gap.
Gonna go ahead and cut some of this off.
Okay, so I'm gonna make my mark down here.
Of where I'm in.
I'm at two and three quarters, I need to cut a couple inches off.
So, I'll get these cutters, here.
All right, now we need to glue this guy to this.
And I wanna stop you before you do that.
You don't wanna just glue, primer, boom.
Stick it on and come down like this.
Because if you have some glue and
primer dripped down through here, it might lock up this check valve here,
and then the air won't be able to come through.
So we're going to unscrew this fitting, and we're going to glue and
primer this guy here, and then screw on the union,
and then screw on the bottom drain dome.
The last thing you'll wanna do is have this pond full of water, and
then not have air come through that dome.
Okay, so we got that done.
Screw this guy on.
And then screw this guy on.
All right, my fingers just barely fit in there.
That's about a three quarter inch gap.
All right, like that.
It's good to go.
[MUSIC]