Hi it’s Jenny from the MSQC. When I saw Tula Pink’s new line called Sail Away by
Free Spirit Fabrics, I fell in love with it. I knew I had to do something nautical with
it. So I started looking around and thinking about blocks. I happen to notice our half
hexagon template makes a perfect boat bottom. So let’s talk about this quilt. So here
is our block. Here’s the half hexagon boat bottom. And I’m going to show you how to
make this block. So cute, so easy. Now when I made this quilt I bought a layer cake. I
had a whole layer cake. And you’ll notice there’s only 12 boats in this quilt, three
across and four down. And so I had leftover squares and so I made two quilts out of one
layer cake. So that’s a little good tip to know especially when you have grandchildren
as fast as I do. And I just had a new one and so he’s going to get a sailboat quilt
which is really fun for me. So let’s, I want to talk a little bit about this sashing.
You can see that I sashed on all these sides and on every other one I sashed, I did, I
left the sashing off at the beginning of the row. This gives the boats some movement back
and forth. You know they’re not blocked up. They set aside from each other. And so
to make this quilt you’re going to need a layer cake or 12 ten inch squares. You’re
going to need 1 ¾ yards for the solid white. That’s for each quilt. And you’re also
going to need about a yard for the border out here. And I think, let me see over here,
let me check, a yard and ⅜ of this blue sashing right here. It’s just an adorable
line. You’re going to love it. So let’s get to making this quilt.
The first thing we’re going to do is I have, we’re using white yardage for this rather
than layer cakes because we need more pieces than our layer cake will give us. But I’ve
gone ahead and cut this yardage into a ten inch square. I’m going to lay it with my,
the square I’m going to cut from my boat. And I’m going to cut those out at the same
time. So the half hexi takes half a layer cake. So what I’m going to do here is I
am going to, I think I’ll do it from this direction. It will make a little more sense
in my brain. And I’m actually going to turn this around. If I did it the other way I would
have a chance of nicking into this top half of this layer and I don’t want to do that.
So what I’m going to do is I’m going to make sure my sides meet up on my layer cake.
And make sure my bottom meets up down here. I’m going to cut off these little sides
just like this. I’m going to come across here and cut off the top. And I’m going
to cut this side over here. Just like this. Alright, now what we have is our boat shape
right here on the bottom. You can see that. And we have a white piece that’s identical.
Now the white piece we’re going to cut in half. I’m going to lay it down again on
my, my mat and I can see that this is, let me move this off over here. I can see that
this is, it’s ten inches so the five inch line is going to be in the middle. And I’m
going to cut this right in half. This is going to make the pieces for the outside of my boat
because what we’re, what we’re making right now is the boat. So here’s our, our
boat bottom right here. And then here’s these pieces and then what we’re going to
do is fold, we’re going to flip these over and we’re going to sew them on like this.
And that’s going to give us the bottom half of our block. So let’s go to the sewing
machine and sew those on. Now when you lay these on, the little edge pieces don’t match
up exactly. They’re just for ease and cutting out on the edge. So you’re just going to
lay this together and go ahead and sew your quarter of an inch down. Grab my pedal out
there. And I’m going to do both sides here. One more. You just want to make sure you get
the angles in the right direction. You’ll have a, you’ll have wonky things on the
side. So I kind of lay my piece so it hangs off just a little bit. Then I go ahead and
sew down. There we go. Go ahead and grab those threads off of there. Now I want to get you
so you have a good look at what I’m talking about here. See how you have a little piece
sticking off there. And this little piece sticking off there. They don’t line up exactly
and you just kind of hang them over. And then when you open up it opens up nice and straight.
And so that then becomes our boat bottom. Now we’re going to go ahead and iron this
to the boat side. We want our fabric not to show through to the white. And we have the
bottom half of our block completed.
So to the top half. Now when you cut your layer cake square in half you’re going to
end up with a piece like this which will give you a five inch square for your sails. Because
we’re going to make the sails exactly the same way that we make the easy pinwheels which
means we need two identical five inch squares. So I’m going to go ahead and cut these five
inch squares. And, out of the top half of this. Now I will not be using this sail for
this boat. So once you get all your pieces and your sails made you’ll want to swap
them around so that you have, so that you mix up your sails. But I’m just kind of
showing you how it’s easy to cut it this way. So now you have your two pieces ready.
And you’re going to put your light with your dark on top of each other. And we’re
going to sew all the way around the outside edge. Now I have one here cut out of another
boat that I made. And we’re going to go ahead and sew that together over here and
make our sail.
Alright so we’ve sewn all the way around. And you’ll get familiar with this method
because I use it a lot. I love half square triangles and I like to, to go ahead and,
and use them. So what I’m going to do now is I’m lining up my ruler where my seams
cross and making sure that the edge of the ruler is on the points of the block. I’m
going to go ahead and cut that diagonally both directions. Make sure it stays lined
up . If your pieces move you want to make sure to move them right back so that you get
a great nice clean layout. Then we’re going to take this over to the iron. We’re going
to put it dark side up, set our seams. We can do that all at once. And then we’ll
lift them open and roll them back. There we go. And just press them all. And this gives
us four half square triangles really quickly. So now we have four of these. And instead
of putting them together as a pinwheel or something else we’re making a sail. So we’re
going to go ahead and we’re going to line them up this way so that they’re all facing
the same direction. And it gives us the look of a sail boat. So then when you put the bottom
of your boat on here, you know, it just, it’s going to be really cute. So then you’re
just going to lay these together, just like you’d sew together a four patch.
So now I’ve gotten these two rows sewn together, just like this. We’ll iron them open and
grab this one. And then we’re going to sew these two rows together to make a block. And
I have one here that I’ve done. This cute little red one. And what we’re looking at
with our boat is, we want this sail to set right in the center of our boat. And we need
to put pieces on either side of this. So when I’m creating the block, just so you know,
because all of our seams differ. What I do is I go ahead and measure out here and I see
exactly how many inches I need. And then I go ahead and cut a piece that’s the width
of this and the height of this. Now for me those came out to 4 ¾ by 5 ¾ . So I’m
going to go ahead and put I have two of those pieces cut right here. And I’m going to
go ahead and sew those on. And they’ll probably end up a little big. The benefit of that is
it gives me a little room to trim to square up my block.
So I’m going to go ahead and sew this on. And before I go to the iron I’m just going
to turn it around and sew my white piece on the other side. Alright. Grab my threads.
Oh I’m terrible with my threads. Ok so let’s iron this open. And then I like to take my
boat and fold it in half and do a little finger press on this seam right here so that I know
exactly where the center is. Then I’m going to line up the center of this. Fold them right
sides together. And I’m going to put a little pin in there so that I can make sure that
it stays. If I could find, oh here’s a little pin. Almost couldn’t find a pin. How crazy
is that. Well I don’t pin very often. But I like those to stay together. So then I’m
going to match this up and go ahead and sew it a quarter of an inch all the way down.
When I get to the center I’ll want to remove that pin. I know, I try to be good. I used
to live dangerously, sew right over the pin. But I’m trying to be good now and remember
to take my pin out. It’s always better to be safe than sorry. Alright so now we’re
going to press this open.
Ok so now we have this great little sailboat block. A little uneven at this end so I’m
going to square that up on this one side. And I’m going to use my, use the bottom
of my boat to, to square it off because I know that those are even because I used one,
one half hexi and cut it right in half. So I know those are even. So I’m going to use
the bottom of that and square it off. And I have this darling sailboat block. How cute
is that?
So then what I did was I just sewed the sashing on these left hand sides or these right hand
sides and the sashing in here. Now the sashing is directional so when I cut these pieces
I wanted my birds to be going in the right direction so I cut it an eight inch strip,
which was how tall. Oh wait a minute I’m not sure how tall that is, let me look. Ten
inch. I cut a ten inch strip and then cut those into 2 ½ inch segments so the birds
would be going the right direction because you don’t want your birds laying over. Anyway
we hope you enjoyed this tutorial on the Sailboat block from the MSQC.