Hello and welcome to the video tutorial on
procedures to discover and add devices in EcoStruxure Power Commission
In this demonstration, you will view the procedures to discover and add devices in
EcoStruxure Power Commission software and create a project.
The devices can be added from inside the home screen or from inside the switchboard view.
There are three ways by which you can add the devices to commissiong software,to add the devices
1. Connect EcoStruxure Power Commission to the Electrical Smart Panel over an Ethernet Channel.
2. Connect the sotware over Serial or usb
3.Directly connect to the Commissioning software
Let’s view the procedure to connect EcoStruxure Power Commission
to the Electrical Smart Panel over an Ethernet Channel.
The prerequisite is that the software and the Electrical Smart panel
should be on the same LAN or must be connected one to one.
To begin, launch Commissioning software. From the home page, click Launch Device Discovery.
You can see that the Gateways are discovered first. Enter the modbus slaves in the address field.
Then, click Find Devices to locate the devices under the discovered gateways.
Once the devices are discovered, select the devices and then click Add devices.
you can even add devices from the Switchboard view. click the plus icon and then select devices option.
from auto discoverd IP devices list click the option add manualy.
Next, enter the IP address of the device and then click, find devices to locate the device.
Once the devices Discovred select the device and then click, add device.
The Discovred device is add to the project.
Now lets view how to add devices by connecting the
Commissioning software to the breaker device over modbus Serial.
The prerequisite is that software should be connected with the breaker devices via the UTA
maintenance module for Compact NS, Compact NSX, or
Powerpact HJL breakers OR via USB cable for MTZbreakers.
To begin, launch the Commissioning software. On the home page, click Launch Device Discovery.
In the Add Devices screen, select the option as Serial from Find Devices via dropdown
The software will detect the COM port automatically to which the devices are connected.
Then, click Find Devices to discover the devices connected to COM Port.
Click Add Device to add the device to the project.
Next, let’s view the process of adding devices by directly connecting to the Commissioning software.
The prerequisite is that the software should be connected with the breaker devices via the UTA maintenance
module for the Compact NS, Compact NSX,
or Powerpact HJL breakers and via the USB cable for MTZ breakers.
To begin, launch the Commissioning software from home page, click Connect Device Directly.
The software will automatically connect to the devices and add them to the project.
This concludes the video on procedures to discover and add devices in EcoStruxure Power Commission
In this video, we saw the procedures to discover and add devices in
EcoStruxure Power Commission software and create a project.