hey guys that's rolando from revemoto and we apologize our audio was bad in the beginning
but we're working on removing a fender for a 2015 toyota rav4
so hit the like button subscribe and smash the push notification
and if you need this fender go to revemoto.com your pre-painted auto body parts source
so let's get started um it does help if you remove the headlight and the front bumper
on this fender removal um there are bolts for the bumper and you have to take the helmet off so put
the videos up here so just remember the headlight and bumper removal it makes things a lot easier
you don't have to take the bumper completely off but you do have to remove it off the side
we're going to start off on the fender liner side it's going to be like these they're like push pins
but we're going to go ahead and cut those off it's hard to take off without um breaking them
i'm just gonna go ahead and cut them off and get new ones at the dealership
and then over here is gonna be your 10 millimeter bolts i'm gonna go ahead
and take those off and that should be it for the fender liner side alright
uh
don't do this
going this way
okay
this one also has sinking but it's exciting
like that
it's all just held on by clips right there okay and there might have been a pushpin down here
also so just look at that underneath your car but this one didn't have it i just pulled it right off
so like right down here once you pull that
fender garnish off there's going to be a 10 millimeter right there
it's gonna look like that
all right so i looked at the vehicle you actually have to go
inside the fender liner right here and there's another
bolt a 10 millimeter inside there so first take off this cover right here demonstrate it
if you guys pull this to the side you'll see this plastic thing
right here basically all you do is kind of like pull it hard
sorry about that so it's just held on by these uh
push pins like this and if you hold it you can get it off and then like right in the bottom
it's kind of hard to see from here so you guys can see right behind there
there's another bolt so you got to take that bolt off all right so let's get started
all right so remember take this uh little plastic piece
inside and then get a longer pressure like this
just like that just like right behind there all right you guys go behind
get an extension
like this all right all right now to go up top on the blender
you see this little cover right here go ahead and just use your fingers you can just pull that off
and it's held down by these things
then you're gonna fill another right there
like that all right so on the very top of the bender where it meets the
windshield, you're going to see this cover right here
and then barely see it but there's a bolt right there we'll take that off
also really tiny there you go
all right now so right here in the back of the fender you're
gonna see this cover right here get the fly head
just like that
this way
all right so now that you guys have that uh cover removed you're gonna see these
so
all right so the last bolt is going to be right there
right there i'm going to take that by 10 millimeter and hopefully expect this to fall
so
all right so now once the uh bolts are all off you go ahead and pull the fender
like that
muscles
you