Hi, I'd like to change my power outlet right there. Why?
Because this is where I sit at our dining table to work and edit my videos and stuff and I have to plug into that, crappy power outlet.
Even the seats are falling apart under my weight. I guess I'll have to reupholster these,
myself?
You know what, I'll make a video about it and post it on my new channel, Mehditation.
Subscribe to my new channel!
But that's not the point. These stupid sockets, in fact, all our sockets in our home have lost
their grip on the plugs! Anything I plug in them just slips out. I don't know
what the previous tenant has shoved in them. See it's like
a limp, guess it's not the male size problem, it's the female side lost its springiness, and doesn't grab the prongs well.
Sometimes I bend the prongs like this, so that it can hold on a bit better. But
let's just change this one. First you remove the cover.
Then, we unscrew the outlet and pull it out-
OW! F*CK!
See the North American outlets look like this, and these side screws are connected to live and neutral wires. So if you grab
them like this it will shock the sh*t out of you, so it's safest, before starting to work on these to open the breaker.
Also the isolating gloves help too. Now a bunch of you might say that the U.K
plugs are the SAFEST in universe, or the European or Australian
outlets are the best, or whatever and you're probably right. But in our continent, we are stuck with this
junk. Why do you think,we use 120 volt ac instead of 220 or 240? Somebody knew
that using these, we would better keep our voltage down or everyone
would die. Anyway, you can either tighten these screws to hold the wires, or just plug them into these holes to keep them tight.
Same power lines in both sockets are shorted together, using, these tiny bridges. In fact, let me show
you something. In some of the outlets especially in the kitchen they
bring two phases to the outlet, and to do so, if you look here carefully, they have to cut that tiny bridge.
F*CK! SH*T! F*CK!
Dammit, I have to learn to open the breaker.
The bridge is totally annihilated now. Anyway, I showed you in my previous video, that these two phases are
120 degrees out of phase to create around 208 volt AC it might be a
high-rise, thing. I've heard that in houses they have a, center tapped transformer
to, make
220 volts 180 degrees out of phase to create a
240 volt AC. Yeah.
Okay, now that, we have the breaker open, we just snip the live and neutral wires and
unscrew the ground wire.
Then we,
what was it called, nudify,
around a centimeter length of the wire.
I don't know if i get demonetized if i show
naked wires. Then, we just push these wires into the holes nice and tight
And also connect the ground.
Also tighten, these, screws all the way down, so they are not hanging out for no reason, shocking people
Like Trump on Twitter. (Laughter)
Now, before i put it all the way together, let's double check to see if it works. I powered the outlets and
connected, this scope and there you go
It's probably fine, but let's just probe the signal to be sure, and remember that the white wire is neutral
and that's where you would be connecting your program
F*CK!
The f*cking white wire was neutral!
F*ck, I connected it backwards.
Remember to read, where to plug the black
and white wires from the back of these outlets. It's written right there
White wire is neutral connected to these wider
slots, and black is live connected to these smaller ones, and earth ground is connected to the
semicircle holes. And we are done. Just screw the outlet back onto the wall nice and straight
Now, where did I put the faceplate?
F*CK!
Son of a..
I have to buy a new one. And put the cover plate on nice and straight. And now just check it with a regular light bulb and
there.
Done, it's a very easy task to do. Just remember if you do this and you make a mistake and the house burns down and
insurance figures out that you did and you are not certified, you'll probably go homeless. So the question is, are you
gonna let the fear of insurance control your life? A real man never worries about mistakes, until it's too late.
🎵It's too late, to apologize.🎵
Oh by the way, I'm doing a presentation in Bay Area Maker Faire. I could
use some.. test subjects if you're around, I would be happy to.. meet you.
🎵It's too laaaaaate.🎵