- What's going on everybody.
Nick here coming at you from
the LA Auto Show.
So if you're wondering why I'm not in the video today,
it's because I'm going to be here
so if you have a chance to stop by LA Auto Show,
check in out.
But today's video's gonna have Jose
teaching you guys some very helpful tips and tricks
so be sure to check that out.
Drop your comments down below
for future videos
and I'll see you guys next time.
(soft music)
- What's up everybody.
Thank you back for tuning into
the Chemical Guys detail garage.
Jose here,
my first video.
I'm actually do this because Nick
is currently in the LA Auto show
which by the way will be passing by.
Feel free to say hello.
We are South Hall of the garage exhibits.
And today we have this nice Toyota Tacoma right here.
As you can tell it's a nice truck right here.
The owner loves to take this vehicle off road.
Likes to go on canyon trips, hiking, etc.
So you can definitely tell,
look at this tire right here.
Nice all terrain tires.
They've gone through
some nice good damage you know.
So it's been raining here in LA
and as the owner has been going off-roading,
the tires have been sitting after while
collecting a lot of dust, a lot of dirt, grime, etc.
Right, so today we're going to show you
how to properly go ahead and clean your tires
as well as give them a nice shine.
And we'll be using Nonsense,
one of our top most all purpose super cleaner.
Nonsense is great because
you can use it as it ready to use
or you can go ahead
and dilute this bottle.
It's upon your preference,
you put ten, twenty to one etc.
So this case we're going
to be doing the all concentrated Nonsense
because these tires seem
to have gone through
some nice nice trips along the road.
(spraying)
So we're going to be spraying
some onto our brush
spraying some of the solution onto the tire
and we're going to go ahead
and slightly agitate it.
Ensuring ourselves
that we're getting through
all of the dirt.
Getting all that dust
(spraying)
right off the tire.
As you can see, wow
even the brush itself has been already
gotten a bit
most of the dirt off.
Still might cast a little rough edges
we might get into working to where they're nice
small exterior brush.
To get into those nice little areas
a larger brush was not able to get into.
Let's go ahead and start getting all of this
rubber tire's nice clean and dry.
So keep in mind all terrain tires are a bit more
different to clean and apply dressing as your regular tires.
The reason why is all these nice rough ridges
rough edges to it which most all terrain tires
are very well to be taken off road,
hiking trip,
and going through the canyons.
And yes you can definitely tell
that was nice and very dirty right there.
Look at all that.
So let's go ahead and turn towel around
and let's go ahead
and go over it again
ensuring ourselves we are drying
and getting all that dirt
and dust off of the tire.
All right now that the tire
is nice dry Nonsense is able to get
all that dirt all that dust off.
We're ready to go ahead and wipe it down
but we want to make sure
that we're able
to give it that nice wet finish look,
keep it nice and shiny,
and also protect it as well
from any future cracking protect it
from getting any dull dullness
and so we're going to go ahead
and use our Nice and Wet Tire Shine
trim coating right here.
Nice and Wet is very great aerosol spray.
It just going to have to shake the bottle real quick.
And this case,
we're definitely decided to go with an aero spray
for the same reason these are all terrain tires.
So it's a little bit difficult
to be able to pass any kind of applicator pad,
Hex-Logic pad etc.,
so an aero spray is a better form to go to.
And easy way to go to
and it still delivers a nice good shine.
So here we go,
We're going to go ahead
and spray it on nice and even.
(spraying)
So we're going to go ahead
and let it sit for a little bit
and then we're gently gonna go ahead
and pat it down,
ensuring ourselves that
there is no over saturation going on.
Ensuring ourselves that the product
is going to penetrate deep into the pores of the tire
giving us a much longer lasting finish
and assuring ourselves that we're gonna
be protecting the tire
and giving it that long lasting shine.
Okay now that we let it sit
for a few seconds going up to a minute,
we're going to go ahead and wipe it down
because the owner, he likes the shine,
but doesn't like a wet wet finish
but does like a nice shine to it.
So we're going to go ahead and wipe it off.
So there you have it you guys.
We ended up using our great Nonsense
to be able to lift any dirt debris,
clean it off, wipe it off,
and we also hit this nice shiny tire
our nice and wet tire shine and trim coating.
That definitely helped restore some shine
to the rubber tire
after going through a nice course
of hiking, off-roading , etc.
Let's go ahead and pull back the tape
to reveal a nice 50/50 finish.
Alrighty you guys as you can see
with this 50/50,
our Nonsense invisible super cleaner
did a great job removing
all the dirt, dust and debris
on that side
and as well giving it a nice tire shine
with our tire shine trim coating as well.
If you guys liked this
video please drop a comment below
and let us know which other videos
you would like for us to do
and also don't forget to like share subscribe.
My name is Jose.
We'll see you guys next time
at the Chemical Guys detail garage.
(atmospheric music)
(electronic music)
(atmospheric music)