Hello friends
First
We named the interfaces to use
If you have multiple ISP connections in your network,
you can send your network traffic through those ISP connections and can make a load balancing network
I will show you how to do load balancing based on client IP address
The following steps will show how to configure PPPoE Client on MikroTik WAN interface
choose your WAN interface from Interfaces dropdown menu
configure PPPoE Client on WAN1 interface
Put your ISP given username in User input field and password in Password input field
Also uncheck Add Default Route checkbox
configure PPPoE Client on WAN2 interface
choose your WAN interface from Interfaces dropdown menu
Also uncheck Add Default Route checkbox
we will now assign LAN Gateway IP so that LAN user can communicate with MikroTik Router
Put your LAN gateway IP in address input field
192.168.88.0/24
Now we will create NAT rule so that our LAN user can access internet through our MikroTik router
Click on NAT tab in this window and then click on add new button
Choose "masquerade" from Action drop down menu
choose "srcnat" from Chain drop-down menu and put your LAN IP block address in Srt Address input field
192.168.88.0/24
Now we have to create Mangle rules which will divide our LAN users into two groups and mark them for proper routing
Choose "prerouting" option from Chain drop-down menu and put Group A IP block in Address input field
192.168.88.0/25
choose "mark routing" option from Action drop-down menu and put "GroupA" in New Routing Mark input box
Similarly, Choose prerouting option from Chain drop-down menu and put Group B IP block in Address input field
and put Group B IP block in Address input field
192.168.88.128/25
choose "mark routing" option from Action drop-down menu and put "GroupB" in New Routing Mark input box
now you have to configure routing
so that your different user group can use different WAN connection for accessing internet
Put "pppoe out 1" in Gateway input field and choose "GroupA" from Routing Mark drop-down menu
Similarly,Put "pppoe out 2" in Gateway input field and choose "GroupB" from Routing Mark drop-down menu
and choose "GroupB" from Routing Mark drop-down menu
After this configuration, your GroupA users will access internet through WAN1 gateway
and GroupB users will access internet through WAN2 gateway
In the next part, I will guide you to configure redundancy in case one of the two wan connections goes down
In the next part
In the next part, I will guide you to configure redundancy in case one of the two wan connections goes down
If this helps
If this helps, don't forget to leave a like and more,
subscribe to my YouTube channel for more helpful videos